CAL.
MODE CHANGE ● Selection of a desired mode can be made by pressing the corresponding button in the MENU display. B ➡ STOPWATCH mode C D TIME/ CALENDAR mode ➡ English ➡ ALARM mode A E ➡ TIMER mode ➡ WORLD RESORT TIME mode [MENU display] * When the desired mode is selected, the opening graphic display is shown before the selected mode appears. 2 ● To change over a mode to another, press button A to return to the MENU display, and then press the corresponding button to select the desired mode.
CHANGEOVER BETWEEN NORMAL AND ENLARGED DISPLAYS ● In all modes except the WORLD RESORT TIME, the display can be selected between the normal display that shows all the data with characters of a normal size and the enlarged display that shows the main data with characters of an enlarged size. With each press, the normal and enlarged displays alternately appear. English [Ex.
TIME/CALENDAR MODE ● Once the time/calendar of your area is set in the TIME/CALENDAR mode, the times of the 38 cities covered in the WORLD RESORT TIME mode will be set automatically. ● Changeover between the standard time and daylight saving time can be made. English A Press in MENU display to show TIME/CALENDAR mode.
TIME/CALENDAR SETTING B ▲ Press to select the digits to be adjusted. ➾ Year ➾ ➾ 12-/24-hour indication ▲ C Month Date English ➾ Selection of the digits Standard time/ City ➾ ➾ Seconds ➾ Minutes ➾ Hour daylight saving time ➾ Set the flashing digits. (Increasing digits) or E Set the flashing digits. (Decreasing digits) ▲ ▲ D Press for 2 to 3 seconds to show TIME/CALENDAR SETTING display. B Return to TIME/CALENDAR mode.
SHOWING THE SELECTED CITY E Press to show the city selected for TIME/CALENDAR mode. English * The name of the selected city is displayed in place of the day, scrolls from right to left, and then the day is displayed again. TURNING ON/OFF OF HOURLY TIME SIGNAL AND BUTTON OPERATION CONFIRMATION SOUND C Hourly time signal mark 6 C With each press, the hourly time signal and sound for button operation confirmation are alternately switched on and off.
DEMONSTRATION FUNCTION ● Provided with a demonstration function, the watch shows the displays in each mode. E Press for 3 seconds in TIME/CALENDAR mode to start the demonstration. ADJUSTING THE CONTRAST ON THE DISPLAY C ▲ C English * The name of the selected city appears in place of the day, and then the demonstration display will start, showing the display of each mode repeatedly. * To stop the demonstration, press any of the buttons.
ALARM MODE ● The alarm can be set to ring daily at five different times a day. ● The alarms can be engaged and disengaged independently of one another. Press in MENU display to show ALARM mode.
ALARM TIME SETTING E Press to select the desired alarm channel (Ch.-1 – Ch.-5). ▲ B Press for 2 to 3 seconds to show ALARM SETTING display. ▲ Press to select the digits to be adjusted (hour/minutes). C Set the flashing digits. (Increasing digits) English ▲ or E Set the flashing digits. (Decreasing digits) ▲ ▲ D B Return to ALARM mode. * “ON” and the alarm marks appear and the alarm is automatically engaged.
ALARM ENGAGEMENT/DISENGAGEMENT ● The alarms can be engaged and disengaged independently of one another. C E Press to select the desired alarm channel (Ch.-1 – Ch.-5). ▲ English C E Alarm mark “ON”/“OFF” mark 10 With each press, the selected alarm is engaged and disengaged alternately. * At the designated time, the alarm rings for 20 seconds. To stop it manually, press any of the buttons.
STOPWATCH MODE ● The stopwatch measures up to 10 hours in 1/100 second increments. C Press in MENU display to show STOPWATCH mode.
MEMORY RECALL FUNCTION ● The first 199 lap and split times are automatically stored in memory. ● The stored data can be recalled either during or after the measurement. B C ▲ B English C or E ▲ E B Press to activate the memory recall function.* With each press, stored data are recalled from the oldest to the newest. With each press, stored data are recalled from the newest to the oldest. Return to STOPWATCH mode. * In memory recall after measurement, the oldest measurement in memory is displayed.
TIMER MODE ● Two types of timer are available: 10-channel preset timer and adjustable timer. ● The adjustable timer can be set up to 9 hours and 59 minutes in minute increments. D Press in MENU display to show TIMER mode.
PRESET TIMER SETTING E Press to select the desired preset time. Selection of the preset time/adjustable timer ⇔ ⇔ 1 min. ⇔ 2 min. ⇔ 3 min. ⇔ 4 min. ⇔ 5 min. ⇔ 10 min. English Adjustable timer ⇔ 1 hour ⇔ 45 min. ⇔ 30 min. ⇔ 15 min. ADJUSTABLE TIMER SETTING E Press to select the adjustable timer. (See above) ▲ B ▲ ▲ ▲ 14 D Press for 2 to 3 seconds to show ADJUSTABLE TIMER SETTING display. Press to select the digits to be adjusted (hour/minutes).
C Set the flashing digits. (Increasing digits) or E Set the flashing digits. (Decreasing digits) ▲ B Return to TIMER mode. C Start / Stop / Restart English TIMER OPERATION No. of times the countdown is repeated Time measured E Reset * When the set time is up, a warning sound beeps for 5 seconds. To stop it manually, press any of the buttons.
WORLD RESORT TIME MODE ● The time of 38 places throughout the world can be displayed together with their respective country code for overseas telephone call. The places include major cities of the world, famous resorts and spots good for surfing. Press in MENU display to show WORLD RESORT TIME mode.
C or E Press to select the desired city. * The name of the selected city scrolls from right to left. * In the normal display, the daylight saving time (summer time) mark, country code, time and city name are shown. CHANGEOVER OF DISPLAYS With each press, the following displays alternately appear. ➡ D ➡ English D D * When the map is displayed, the selected city/resort on the map flashes. * In the enlarged display, “DST” (Daylight saving time) is not displayed.
CHANGEOVER BETWEEN STANDARD TIME AND DAYLIGHT SAVING TIME B If the daylight saving time is effective in the selected city, press to show the daylight saving time. English * With each press of button B, the standard time and daylight saving time of the city are alternatively shown.
GMT ± (hours) Name of city/resort Réunion Dubai Mauritius Island Maldive Islands Bangkok Java Island Hong Kong Bali Island Cebú Island Singapore Tokyo Torami Bells Beach* Sydney* Gold Coast Guam Island Saipan Island New Caledonia Island Name of country/area France United Arab Emirates Mauritius Maldives Thailand Indonesia China Indonesia The Philippines Singapore Japan Japan Australia Australia Australia U.S.A. U.S.A.
English GMT ± (hours) + 12 - 10 - 10 -8 -8 -8 -7 -6 -6 -5 -5 -5 -3 Name of city/resort New Zealand Islands* Hawaii Islands Tahiti Island San Francisco* Los Angeles* Huntington Beach* Cabo San Lucas* Chicago* Cancún* Cocoa Beach* New York* Miami* Rio de Janeiro* Name of country/area New Zealand U.S.A. French Polynesia U.S.A. U.S.A. U.S.A. Mexico U.S.A. Mexico U.S.A. U.S.A. U.S.A.
ILLUMINATING LIGHT (Electroluminescent panel) F Turn on the illuminating light. * The display panel is evenly illuminated for 3 seconds. TURNING ON/OFF OF BUTTON OPERATION CONFIRMATION LIGHT “EL” mark F F English F With each continuous press for 2 to 3 seconds, the button operation confirmation light is alternately turned on and off. * When the “EL” mark is turned on, the display is illuminated for 2 seconds with each press of a button to operate the watch.
NOTES ON USING THE WATCH English TIME/CALENDAR MODE 22 [TIME/CALENDAR SETTING] ● The calendar automatically adjusts for odd and even months including February of leap years from 1999 to 2048. ● Once the year, month and date have been set, the day of the week is automatically set. ● Setting the seconds: • With the second digits flashing, press button C or E in accordance with a time signal. The second digits are reset to “00”.
and becomes lower as they decrease. ● The contrast level has been initially set at “10” at the factory. ● When the contrast level is set to “0”, the digits on the display will be unable to read. ● With each press of buttons C and E, the contrast level increases and decreases by one, respectively. ALARM MODE English [ALARM TIME SETTING] ● The flashing digits move quickly if button C or E is kept pressed.
● The lap time and split time measured remain displayed for 10 seconds together with the flashing lap number. Then, the display automatically returns to the measurement in progress. Lap time Split time English Lap No. ● Even if the digits are reset to “00” in the stopwatch measurement, the stored data is not erased and can be recalled unless a new measurement is started. ● Even if the STOPWATCH mode is changed to another while the measurement is in progress, it continues counting properly.
TIMER mode in 2 to 3 minutes. [TIMER OPERATION] ● Restart and stop of the timer can be repeated by pressing button C. ● Even if the TIMER mode is changed to another while the measurement is in progress, it continues counting properly. After the timer is used, however, be sure to reset it as the battery energy is consumed enormously to shorten the battery life.
BATTERY CHANGE 2 English Years Battery life : Approx. 2 years Battery : SEIKO CR2025 ● The battery life may be less than 2 years if the alarm is used more than once a day, the illuminating light more than 3 times a day and/or the button operation confirmation sound more than 50 times a day. ● As the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period.
Press and hold buttons A, B, C and E at the same time for 2 to 3 seconds. The display will become blank, and the MENU display will appear when the buttons are released. Then, press button A. “TIME 1-JAN A12:00'00" FRI” will be displayed. * Before using the watch, set the time/calendar and then, the alarm. WARNING English ● Do not remove the battery from the watch. ● If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately.
TO PRESERVE THE QUALITY OF YOUR WATCH WATER RESISTANCE ● Non-water resistant English • If the watch becomes wet, have it checked by an AUTHORIZED PULSAR DEALER or SERVICE CENTER. ● Water resistant 5/10/15/20 bar 5 bar WR 10/15/20 bar WR 28 • Do not operate the buttons when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely.
* Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. Care should also be taken on diving into water. ** We recommend that you wear a PULSAR Diver’s Watch for scuba diving. TEMPERATURES MAGNETISM Your watch will not be affected by magnetism.
English SHOCKS & VIBRATION 30 PERIODIC CHECK Light activities will not It is recommended that the affect your watch, but be watch be checked once 2-3 careful not to drop your every 2 to 3 years. Have Years watch or hit it against hard your watch checked by an surfaces, as this may AUTHORIZED PULSAR cause damage. DEALER or SERVICE CENTER to ensure that the case, buttons, gasket and crystal seal remain intact.
STATIC ELECTRICITY LIQUID CRYSTAL PANEL The normal life expectancy for the liquid crystal panel of the watch is approximately 5 years. 5 Years After that it may decrease in contrast, becoming difficult to read. Please contact your AUTHORIZED PULSAR DEALER or SERVICE CENTER if you wish to have a new panel fitted (guaranteed one year). English The IC (Integrated Circuit) used in your watch will be affected by static electricity which may disturb the display.