CAL.
MODE CHANGE ● Selection of a desired mode can be made by pressing the corresponding button in the MENU display. ➡ ALARM mode B STOPWATCH ➡ mode C D ➡ TIME/ CALENDAR mode A E ➡ METRONOME mode TIME ➡ WORLD mode [MENU display] * When the desired mode is selected, the opening graphic display is shown before the selected mode appears. 2 ● To change over a mode to another, press button A to return to the MENU display, and then press the corresponding button to select the desired mode.
CHANGEOVER BETWEEN NORMAL AND ENLARGED DISPLAYS ● In all modes except the METRONOME, the display can be selected between the normal display that shows all the data with characters of a normal size and the enlarged display that shows the main data with characters of an enlarged size. With each press, the normal and enlarged displays alternately appear. [Ex.
TIME/CALENDAR MODE ● Once the time/calendar of your area is set in the TIME/CALENDAR mode, the times of the 38 cities covered in the WORLD TIME mode will be set automatically. ● Changeover between the standard time and daylight saving time can be made. A Press in MENU display to show TIME/CALENDAR mode.
TIME/CALENDAR SETTING B ▲ Press to select the digits to be adjusted. ➾ ➾ Selection of the digits Standard time/ City ➾ ➾ Seconds ➾ Minutes ➾ Hour daylight saving time Year ➾ ➾ 12-/24-hour indication Month ➾ Date ▲ C Set the flashing digits. (Increasing digits) or E Set the flashing digits. (Decreasing digits) ▲ ▲ D Press for 2 to 3 seconds to show TIME/CALENDAR SETTING display. B Return to TIME/CALENDAR mode.
SHOWING THE SELECTED CITY E Press to show the city selected for TIME/CALENDAR mode. * The name of the selected city is displayed in place of the day, scrolls from right to left, and then the day is displayed again. TURNING ON/OFF OF HOURLY TIME SIGNAL AND BUTTON OPERATION CONFIRMATION SOUND C Hourly time signal mark 6 C With each press, the hourly time signal and sound for button operation confirmation are alternately switched on and off.
DEMONSTRATION FUNCTION ● Provided with a demonstration function, the watch shows the displays in each mode. E Press for 3 seconds in TIME/CALENDAR mode to start the demonstration. * The name of the selected city appears in place of the day, and then the demonstration display will start, showing the display of each mode repeatedly. * To stop the demonstration, press button A, B, C, D or E.
ALARM MODE ● The alarm can be set to ring daily at five different times a day. ● The alarms can be engaged and disengaged independently of one another. B Press in MENU display to show ALARM mode.
ALARM TIME SETTING E Press to select the desired alarm channel (Ch.-1 – Ch.-5). ▲ B Press for 2 to 3 seconds to show ALARM SETTING display. ▲ Press to select the digits to be adjusted (hour/minutes). ▲ C Set the flashing digits. (Increasing digits) or E Set the flashing digits. (Decreasing digits) ▲ ▲ D B Return to ALARM mode. * “ON” and the alarm marks appear and the alarm is automatically engaged.
ALARM ENGAGEMENT/DISENGAGEMENT ● The alarms can be engaged and disengaged independently of one another. C E Press to select the desired alarm channel (Ch.-1 – Ch.-5). ▲ C E Alarm mark “ON”/“OFF” mark 10 With each press, the selected alarm is engaged and disengaged alternately. * At the designated time, the alarm rings for 20 seconds. To stop it manually, press any of the buttons.
STOPWATCH MODE ● The stopwatch measures up to 10 hours in one-SMPTE (= 1/30 seconds) increments. SMPTE : The Society of Motion Picture and Television Engineers It also refers to a unit of time measurement used in editing videorecorded data, etc. One SMPTE corresponds to 1/30 seconds. C Press in MENU display to show STOPWATCH mode.
Lap time and split time measurement ••••••• LAP/SPLIT 2 C STOP ▲ E ▲ E LAP/SPLIT 1 ▲ ▲ C START E RESET MEMORY RECALL FUNCTION ● The first 199 lap and split times are automatically stored in memory. ● The stored data can be recalled either during or after the measurement. C B ▲ B C or E E ▲ 12 Press to activate the memory recall function.* With each press, stored data are recalled from the oldest to the newest. With each press, stored data are recalled from the newest to the oldest.
B Return to STOPWATCH mode. * In memory recall after measurement, the oldest measurement in memory is displayed. In memory recall during measurement, the newest measurement in memory is displayed.
METRONOME MODE ● The tempo can be set from 30 up to 250 beats per minute. ● Seven types of beats are available for the metronome. ● While the metronome is giving out the tempo sound, the metronome setting can be made. D Press in MENU display to show METRONOME mode.
METRONOME SETTING ▲ D Press to select the digits to be adjusted (beat/tempo). ▲ C Set the flashing digits. (Increasing digits) or E Set the flashing digits.
WORLD TIME MODE ● The time of 38 cities in different time zones throughout the world can be displayed together with their respective country code for overseas telephone call. E Press in MENU display to show WORLD TIME mode.
C or E Press to select the desired city. * The name of the selected city scrolls from right to left. * In the normal display, the daylight saving time (summer time) mark, country code, time and city name are shown. CHANGEOVER BETWEEN STANDARD TIME AND DAYLIGHT SAVING TIME B If the daylight saving time is effective in the selected city, press to show the daylight saving time. * With each press of button B, the standard time and daylight saving time of the city are alternately shown.
GMT ± (hours) 18 +1 +1 +1 +2 +2 +2 +3 +3 +3 + 3.5 +4 + 4.5 +5 + 5.5 +6 + 6.
GMT ± (hours) + 9.5 + 10 + 11 + 12 - 10 -9 -8 -8 -7 -6 -5 -5 -4 -3 -3 -1 City mark City name Country name Country code ADL SYD NOU WLG HNL ANC YVR LAX DEN CHI NYC YMQ CCS BUE RIO PDL Adelaide* Sydney* Noumea Wellington* Honolulu Anchorage* Vancouver* Los Angeles* Denver* Chicago* New York* Montreal* Caracas Buenos Aires Rio de Janeiro* Azores Is.* Australia Australia New Caledonia New Zealand U.S.A. U.S.A. Canada U.S.A. U.S.A. U.S.A. U.S.A.
ILLUMINATING LIGHT (Electroluminescent panel) F Turn on the illuminating light. * The display panel is evenly illuminated for 3 seconds. F TURNING ON/OFF OF BUTTON OPERATION CONFIRMATION LIGHT F “EL” mark 20 F With each continuous press for 2 to 3 seconds, the button operation confirmation light is alternately turned on and off. * When the “EL” mark is turned on, the display is illuminated for 2 seconds with each press of a button to operate the watch.
NOTES ON USING THE WATCH MODE CHANGE ● The flashing “SMPT” in the MENU display indicates that the stopwatch is counting. TIME/CALENDAR MODE [TIME/CALENDAR SETTING] ● The calendar automatically adjusts for odd and even months including February of leap years from 1999 to 2048. ● Once the year, month and date have been set, the day of the week is automatically set. ● Setting the seconds: • With the second digits flashing, press button C or E in accordance with a time signal.
of the buttons to return to the TIME/CALENDAR mode, and then set the time/calendar again. [ADJUSTING THE CONTRAST ON THE DISPLAY] ● The contrast on the liquid crystal display can be adjusted in 16 steps from level “0” to “15”. The contrast becomes higher as the digits indicating the contrast level increase and becomes lower as they decrease. ● The contrast level has been initially set at “10” at the factory. ● When the contrast level is set to “0”, the digits on the display will be unable to read.
STOPWATCH MODE ● After 10 hours have been measured, the stopwatch continues measuring from “00”. If it is left counting for more than 100 hours, it will automatically be stopped. ● Restart and stop of the stopwatch can be repeated by pressing button C. ● Measurement of the lap time and split time can be repeated by pressing button E. ● The lap number counts up to “199”. After “199”, the number is displayed in two digits such as “00” for 200, “01” for 201, and so on.
METRONOME MODE [METRONOME SETTING] ● The flashing digits move quickly if button C or E is kept pressed. [METRONOME OPERATION] ● If the illuminating light is turned on while the metronome is in use, the metronome sound stops and then resumes in 3 seconds. WORLD TIME MODE ● In the enlarged display, “DST” (daylight saving time mark) is not displayed. ● The time differences and use of daylight saving time may change in some areas or countries when they are so decided by the countries concerned.
BATTERY CHANGE 2 Years Battery life : Approx. 2 years Battery : SEIKO CR2025 ● The battery life may be less than 2 years if the alarm is used more than once a day, the illuminating light more than 3 times a day and/or the button operation confirmation sound more than 50 times a day. ● As the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period.
Press and hold buttons A, B, C and E at the same time for 2 to 3 seconds. The display will become blank, and the MENU display will appear when the buttons are released. Then, press button A. “TIME 1-JAN A12:00'00" FRI” will be displayed. * Before using the watch, set the time/calendar and then, the alarm. WARNING ● Do not remove the battery from the watch. ● If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately.
TO PRESERVE THE QUALITY OF YOUR WATCH WATER RESISTANCE ● Non-water resistant • If the watch becomes wet, have it checked by an AUTHORIZED PULSAR DEALER or SERVICE CENTER. ● Water resistant 5/10/15/20 bar 5 bar WR 10/15/20 bar WR • Do not operate the buttons when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely.
* Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. Care should also be taken on diving into water. ** We recommend that you wear a PULSAR Diver’s Watch for scuba diving. TEMPERATURES 28 Your watch works with +50°C stable accuracy within a temperature range of 5° C -10°C and 35° C (41° F and 95° F).
SHOCKS & VIBRATION PERIODIC CHECK Light activities will not It is recommended that the affect your watch, but be watch be checked once 2-3 careful not to drop your every 2 to 3 years. Have Years watch or hit it against hard your watch checked by an surfaces, as this may AUTHORIZED PULSAR cause damage. DEALER or SERVICE CENTER to ensure that the case, buttons, gasket and crystal seal remain intact.
STATIC ELECTRICITY The IC (Integrated Circuit) used in your watch will be affected by static electricity which may disturb the display. Keep the watch away from close contact with objects such as TV screens which emit strong static electricity. 30 LIQUID CRYSTAL PANEL The normal life expectancy for the liquid crystal panel of the watch is approximately 5 years. 5 Years After that it may decrease in contrast, becoming difficult to read.
