CAL.
MODE CHANGE ILLUMINATING LIGHT (LED PANEL) l Selection of a desired mode can be made by pressing and holding button A for more than two seconds. D Press to turn on the LED light.
TIME/CALENDAR MODE (TIME) TIME/CALENDAR SETTING 4 Year Month Date ➾ ➾ Minute ➾ Hour 12-/24-hour indication Year Second ➾ Date ➾ ➾ DST C Contrast level adjustment Month Set the flashing digits. (Increasing digits) or B Set the flashing digits. (Decreasing digits) s D s s Second E City ➾ C A AM/PM mark Selection of the digits Minute B Press to select the digits to be adjusted.
STOPWATCH MODE (CHRONO) CHANGEOVER BETWEEN STANDARD TIME AND DAYLIGHT SAVING TIME E If the daylight saving time is effective in the selected city, press to show the daylight saving time. A Press until the watch enters STOPWATCH mode. “CHR” is shown, and the watch enters the STOPWATCH display in 2 seconds. Remaining memory capacity KEY SOUND SETTING C Press to turn the key sound on or off. The key sound can be heard by pressing and holding buttons C and E at the same time.
STOPWATCH OPERATION Lap number s s s LAP/SPLIT 2 Lap time s Press to stop the stopwatch. While the stopwatch is measuring, STOPWATCH mark is flashing. STOPWATCH mark B English E B s 8 LAP/SPLIT 1 Press to take a lap time. C Press and hold for more than 2 seconds to change over Lap time and Split time. s English E CHANGEOVER BETWEEN LAP TIME AND SPLIT TIME B Press to start the stopwatch.
MEMORY RECALL MODE HOW TO DELETE THE CHANNEL E E Lap and Split times with Lap number Best lap time s Average lap time Total time s English Channel number E s E s s Channel number 10 A Press to view the contents of the selected chanel data. E Press and hold for 2 seconds again to delete all the stored data. A Keep pressed for another 2 seconds. After "F-100" is displayed, the watch automatically returns to MEMORY RECALL display and "----" mark is displayed.
TIMER MODE TIMER SETTING A Press to show TIMER mode. A s l The timer can be set from 1 minute up to 59 minutes 59 seconds in one-second increments. C B A Set time A 12 C Set the flashing digits. (Decreasing digits) s B Set the flashing digits. (Increasing digits) Return to TIMER mode. English English or Press for 2 seconds to show TIMER SETTING display. The minute digits start flashing.
ALARM MODE TIMER OPERATION C Start / Stop / Restart A Press until the watch enters ALARM mode. Alarm channel Timer mark E l l Reset While the timer is counting, TIMER mark is flashing. When the set time is up, a warning sound beeps for 10 seconds. To stop it manually, press any of the buttons. B C A D English English Set time l The alarm can be set to ring daily at three different times per day.
E Press to select the desired alarm channel (from AL-1 to AL-3). s A Press for 2 seconds to show ALARM SETTING display. s English s Press to select the digits to be adjusted (hour/minute). C Set the flashing digits. (Increasing digits) B Set the flashing digits. (Decreasing digits) or E Press to select the desired alarm channel (from AL-1 to AL-3). C With each pressing, the selected alarm is engaged and disengaged alternately. At the designated time, the alarm rings for 20 seconds.
WORLD TIME MODE CHANGEOVER BETWEEN STANDARD TIME AND DAYLIGHT SAVING TIME l The time of 33 cities in different time zones throughout the world can be displayed. A If the daylight saving time is effective in the selected city, press to show the daylight saving time. Press button E to return to the standard time. Press to show WORLD TIME mode. City mark DST mark B C Current time of selected city TIME DIFFERENCES D A E 18 or C Press to select the desired city.
English City mark City name Country name +1 BER ATH CAI MOW BGW THR DXB KBL KHI DEL DAC RGN BKK BJS HKG SEL Berlin* Athens* Cairo Moscow Baghdad Tehran* Dubai Kabul Karachi Delhi Dhaka Yangon Bangkok Beijing Hong Kong Seoul Germany Greece Egypt Russia Iraq Iran United Arab Emirates Afghanistan Pakistan India Bangladesh Myanmar Thailand China China Republic of Korea +2 +2 +3 +3 + 3.5 +4 + 4.5 +5 + 5.5 +6 + 6.5 +7 +8 +8 +9 GMT ± (hours) City mark +9 + 9.
Notice on change of Santiago time zone 22 NOTES ON USING THE WATCH TIME/CALENDAR MODE [TIME/CALENDAR SETTING] l The calendar automatically adjusts for odd and even months including February of leap years from 2009 to 2058. l Once the year, month and date have been set, the day of the week is automatically set. l Setting the seconds: • With the second digits flashing, press button B or C in accordance with a time signal. The second digits are reset to “00”.
STOPWATCH MODE MEMORY RECALL mode Lap no. Split time TIMER MODE [TIMER SETTING] l The flashing digits move quickly if button B or C is kept pressed. l If the watch is left untouched with the digits flashing, it will automatically return to the TIMER mode in 2 to 3 minutes. [TIMER OPERATION] l Restart and stop of the timer can be repeated by pressing button C.
BATTERY CHANGE WORLD TIME MODE l The time differences and use of daylight saving time may change in some areas or countries. l The LED (light emitting diode) panel loses its luminance as the battery voltage gets lowered. Also, its luminance level decreases gradually with use. l The luminance level of LED may decrease if it is left in low temperature. l If the watch is exposed to low temperatures while the battery is nearing the end of its life, the LED illumination time may become shorter than normal.
l Necessary procedure after battery change After the battery is replaced with a new one or if an abnormal display (broken digits, etc.) appears, follow the procedure below to reset the IC. WARNING l Do not remove the battery from the watch. l If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately. l Never short-circuit, tamper with or heat the battery, and never expose it to fire.
NOTE: Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. Care should also be taken on diving into water. TEMPERATURES Operational temperature r a n g e : B e t w e e n -5° C (+23° F) and 50° C (122° F) +40°C 0°C +50°C 5°C MAGNETISM Your watch will not be affected by magnetism.
PERIODIC CHECK It is recommended that the watch be checked once every 2 to 3 years. Have your watch checked by an AUTHORIZED PULSAR DEALER or SER VICE CENTER to ensure that the case, buttons, gasket and crystal seal remain intact. English 2-3 Years PRECAUTION REGARDING CASE BACK PROTECTIVE FILM If your watch has a protective film and/or a sticker on the case back, be sure to peel them off before using your watch.
