Operation Manual

22 23

English

NOTES ON USING THE WATCH

TIME/CALENDAR MODE

[TIME/CALENDAR SETTING]

The calendar automatically adjusts for odd and even months including February of

leap years from 2009 to 2058.

Once the year, month and date have been set, the day of the week is automatically

set.

Setting the seconds:

• With the second digits ﬂashing, press button B or C in accordance with a time

signal. The second digits are reset to “00”.

• When the seconds count any number from “30” to “59” and button B or C is

pressed, one minute is added and the seconds are reset to “00”.

The ﬂashing digits except the seconds and 12-/24-hour indication move quickly if

button B or C is kept pressed.

If the watch is left untouched with the digits ﬂashing, it will automatically return to

the TIME/CALENDAR mode in 2 to 3 minutes.

Note on unusual display:

While setting the time/calendar, all the segments of the display will light up if both

buttons C and E are pressed at the same time. This is not a malfunction. Press

any one of the buttons to return to the TIME/CALENDAR mode, and then set the

time/calendar again.

Notice on change of Santiago time zone

Santiago had previously been in a time zone that was 4 hours behind GMT. However,

since 2015, Santiago has shifted to a time zone that is 3 hours behind GMT.