Operation Manual

24 25
English
English
STOPWATCH MODE
l
After 9 hours, 59 minutes and 59.99 seconds have been measured, the stopwatch
stops. Press button E to reset the stopwatch.
l
Restart and stop of the stopwatch can be repeated by pressing button C.
l
Measurement of the lap time and split time can be repeated by pressing button E.
l
The lap time and split time measured remain displayed for 10 seconds together
with the flashing lap number. Then, the display automatically returns to the mea-
surement in progress.
Lap time
Split time
Lap no.
l
Even if the digits are reset to “00” in the stopwatch measurement, the stored data
is not erased and can be recalled unless a new measurement is started.
l
Even if the STOPWATCH mode is changed to another while the measurement is
in progress, it continues counting properly. After using the stopwatch function, be
sure to stop the stopwatch to avoid unnecessary battery usage.
TIMER MODE
[TIMER SETTING]
l
The flashing digits move quickly if button B or C is kept pressed.
l
If the watch is left untouched with the digits flashing, it will automatically return to
the TIMER mode in 2 to 3 minutes.
[TIMER OPERATION]
l
Restart and stop of the timer can be repeated by pressing button C.
MEMORY RECALL mode
l
If no measurement is made, “ - - - - ” mark will be displayed when button A is
pressed to show the memory recall display.
ALARM MODE
[ALARM TIME SETTING]
l
The flashing digits move quickly if button B or C is kept pressed.
l
If the watch is left untouched with the digits flashing, it will automatically return to
the ALARM mode in 2 to 3 minutes.
l
When the time function is displayed in the 24-hour indication, the alarms are also
displayed in the 24-hour indication.
[ALARM ENGAGEMENT/DISENGAGEMENT]
l
When any one of the alarms is engaged, the alarm mark is displayed.