Operation Manual

English

SETTING THE TIME AND

ADJUSTING THE STOPWATCH HAND POSITION

● This watch is so designed that the following are all made with the crown at the

second click position:

1) main time setting

2) stopwatch hand position adjustment

Once the crown is pulled out to the second click, be sure to check and adjust 1)

and 2) at the same time.

CROWN

Pull out to second click when the small second hand is at the

12 o’clock position.

1) MAIN TIME SETTING

Hour hand Minute hand

Small second hand

CROWN

Turn to set the hour and

minute hands.

* It is recommended that the hands be set

to the time a few minutes ahead of the

current time, taking into consideration

the time required to adjust the

STOPWATCH hand position .

2) STOPWATCH HAND POSITION ADJUSTMENT

● If the STOPWATCH hands are not in the “0” position, follow the procedure below

to set them to the “0” position.

01_YM91A(E)001-016 05.6.30, 3:54 PMPage 4-5 Adobe PageMaker 6.5J/PPC