Operation Manual

English

SETTING THE TIME AND ADJUSTING THE STOPWATCH HAND POSITION

NOTES ON OPERATING THE WATCH

● When the stopwatch is or has been measuring or is stopped, if the crown is pulled out

to the second click, it will automatically reset the STOPWATCH hands to “0”.

[TIME SETTING]

● When setting the hour hand, be sure to check that AM/PM is correctly set. The watch

is so designed that the date changes once in 24 hours.

● When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time

and then turn it back to the exact minute.

SETTING THE DATE

● It is necessary to adjust the date at the end of February and 30-day months.

● Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not

change properly.

STOPWATCH

● Restart and stop of the stopwatch can be repeated by pressing button A.

● Measurement and release of split time can be repeated by pressing button B.