Operation Manual

English
12
CARE OF CASE AND BRACELET
To prevent possible rusting
of the case and bracelet
caused by dust, moisture and
perspiration, wipe them
periodically with a soft dry
cloth.
Light activities will not affect
your watch, but be sure to take
the watch off your wrist when
you engage in strenuous sports.
Also be careful not to drop your
watch on the floor.
SHOCKS
Be careful not to expose the
watch to solvents, mercury,
cosmetic spray, detergents,
adhesives or paints.
Otherwise, the case,
bracelet, etc. may become
CHEMICALS
discolored, deteriorated or damaged.
It is recommended that the
watch be checked once every
2 to 3 years. Have your
watch checked by an
AUTHORIZED PULSAR
PERIODIC CHECK
DEALER or SERVICE CENTER to ensure
that the case, crown, buttons, gasket and
crystal seal remain intact.
2 - 3
Years
PRECAUTION REGARDING
CASE BACK PROTECTIVE FILM
If your watch has a protective
film and/or a sticker on the
case back, be sure to peel
them off before using your
watch.