CRUISER SCOOTER OWNER’S MANUAL FOR USE WITH THE FOLLOWING PULSE PERFORMANCE PRODUCTS™ SCOOTERS • CALIFORNIA DO NOT RETURN TO STORE! QUESTIONS OR COMMENTS? CALL (866)-434-6067 NOTE: Manual illustrations are for reference purposes only. Illustrations may not reflect the exact appearance of the actual product. Specifications are subject to change without notice. 06.20.
Table of Contents Safety and Warnings Before You Start Set Up and Usage Instructions Check Before Riding Safety Tips Warranty 2-3 4-5 6 6-7 7 8 NOTE: Read and understand this entire manual before allowing a child to use this product. DO NOT RETURN TO STORE. Questions or comments? Call 1-866-434-6067. NOTE: Manual illustrations are for reference purposes only. Illustrations may not reflect the exact appearance of the actual product. Specifications are subject to change without notice.
• • • • • • Replace all worn or broken parts immediately. Ride only on flat, dry surfaces such as pavement or level ground without loose debris, such as sand, leaves, rocks or gravel. To help reduce the risk of injury, adult supervision is recommended. Rider weight does not necessarily mean a child’s size is appropriate to fit or maintain control on this scooter. A parent’s decision to allow his or her child to ride this product should be based on the child’s skill, maturity and ability.
Before You Start Remove contents from box and remove any packaging that protect the components from damage during shipping. Inspect the contents of the box to ensure that all components are included and are undamaged.
Handlebar Handlebar clamp Grip Stem tube Rear fender brake Fork headset lock nut Down tube Quick release clamp Front fork Deck Wheels and bearings Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
Set Up and Usage Instructions 1. Align handlebars both vertically and horizontally (a) onto handlebar steer tube clamp (b) install handlebar clamp and hardware (c&d) and tighten evenly and securely with the 5mm hex wrench and 10mm wrench. 2. Lift handlebars up and fully insert into the front fork tube. Adjust quick release clamp adjustment nut, but do not over-tighten. Fully close clamp lever. To fold down, reverse this sequence of operations.
Products™ wheels. Worn wheels and bearings are considered normal wear-and-tear and are not covered by the Pulse Performance Products™ warranty. Wheels other than genuine Pulse Performance Products™ wheels may not be compatible with your Pulse Performance Products™ scooter. The use of anything other than genuine Pulse Performance Products™ replacement parts may affect your safety and will void your warranty. Cleaning Your Scooter Wipe with a damp cloth to remove dirt and dust.
Safety Tips Loose Parts Check and secure all fasteners before every ride. Make sure the stem tube clamp is tightened properly before riding. Replacement Parts For a complete selection of parts visit our website at www.pulsescooters.com. Replace all worn or broken parts immediately. Safety Gear Always wear proper protective equipment such as an approved safety helmet. Elbow and kneepads are also recommended.
Warranty The manufacturer warranties this product to be free of manufacturing defects for a period of 90 days from the date of purchase. This Limited Warranty does not cover normal wear and tear or any damage, failure or loss caused by improper assembly, maintenance, or storage.
facebook.com/pulseperfprod twitter.com/pulseperfprod Pulse Performance Products™ A Division of Bravo Sports™ 12801 Carmenita Rd.
