Manual

7
* * Please Note * *
If, after installing your ShowerSpa, you experience a knocking sound inside the wall when the
unit is turned on, you may need a Check Valve to further balance your water pressure. Call our
Tech Support Team at [phone] and we will send you a Check Valve at no charge.
Usage
Pressure Balance Mixing Valve
The Maui ShowerSpa is eqiuipped with a cUPC® pressure balance mixing valve to adjust water flow
and temperature. The valve automatically adjusts to changes in water pressure (i.e. someone flushes a
toilet), keeping your temerature constant and preventing accidental scalding. To turn on the ShowerSpa
simply raise the handle until the desired flow rate is achieved. Rotate to the right to decrease tempera-
ture and rotate to the left to increase temperature. Be sure that the handle is in the OFF position when
you are done using your ShowerSpa so that pressure does not build up inside the unit.
Brass Diverter
The brass diverter is used to change between ShowerSpa functions. Simply rotate the diverter knob either
direction to select the desired function—shower head, hand shower or body jets.
Body Jets
The Maui ShowerSpa is eqiuipped with four dual-head body jets. Each jet can be adjusted to spray in
almost any direction. Spin the jet left or right along the vertical axis or rotate the head to find the perfect
position. They are so versatile that two people can independently share the jets standing side by side.
Hand Shower
The hand shower has three individual functions and two combo functions. Rotate the head of the hand
shower left or right to change between the power spray, pulsating massage or gentle cascade functions.
To adjust angle of hand shower, loosen ring on the hand shower holder, gently rotate toward you or the
wall, then tighten ring.
Spray Straight™ Technology
The Maui is equipped with Spray Straight™ technology in the tips of the showerhead, hand shower
and body jets. If the stream becomes obstructed from mineral deposits, simply rub the soft tips with your
finger to loosen the deposits.
Care and Maintenance
Always blot dry any water from the surface of your ShowerSpa. To help protect your ShowerSpa from
hard water stains and mineral deposits, use an auto spray wax periodically and wipe down your Shower-
Spa after each use. Allowing water to evaporate on the surface can lead to a buildup of mineral deposits.
Cleaning with a damp, nonabrasive sponge and drying with a clean soft cloth should help keep your
ShowerSpa looking beautiful. Variation in color and finish is normal, adding to the beauty of these hand-
crafted fixtures and making each one unique.
REMEMBER
NEVER use any abrasives or harsh cleaners!
Clean with mild soap and water ONLY!
To keep your ShowerSpa in pristine condition,
DRY AFTER EACH USE!