KIHEI GL Kihei II ShowerSpa Model #1013- GL Owner's Manual
Kihei GL ShowerSpa Model #1 (Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Kihei GL ShowerSpa Product Dimensions 3
Kihei GL ShowerSpa Parts Legend 4 1. ShowerSpa 7. Hand Shower 13. Mount Bracket 2. Showerhead 8. Hand Shower Holder 14. Mounting Screw................(2) 3. Shower Arm 9. Hand Shower Hose 15. Nylon Anchor.....................(2) 4. Slide Bar 10. Machine Screw..................(4) 16. Glass Shelf 5. Slide Bar Bracket...............(2) 11. Lock Washer.......................(4) 17. Shelf Set Screw..................(2) 6. Slide Bar Cap......................(2) 12. Rubber Washer................
Kihei GL ShowerSpa Assembly Some Assembly is Required Prior to Installation. Slide Bar Assembly Refer to exploded line drawing for reference. 1. Hold slide bar (4) with grooves facing away from you. Press button on hand shower holder (8) and place onto slide bar (4) with holder facing you and button on top. 2. With slide bar (4) facing you, align grooves on bracket (5) with grooves on back of slide bar (4). Screw holes on bracket (5) should extend to left side of bar.
Installation New Construction or Extensive Remodel – New Finished Wall Surface 1. Prior to sheetrock, stub-out ½" hot and cold supply lines beyond finished wall surface, 4" on center. For best results, attach 90° brass fittings (available at most hardware stores) to the stub-outs maintaining ¼" – ½" of space between the fitting and finished wall. The open end of the 90° brass fittings should point down so the supply lines attach parallel to the wall. 1 6.
Usage Pressure Balance Mixing Valve The Kihei II ShowerSpa is eqiuipped with a cUPC® pressure balance mixing valve to adjust water flow and temperature. The valve automatically adjusts to changes in water pressure (i.e. someone flushes a toilet), keeping your temerature constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the handle until the desired flow rate is achieved. Rotate to the right to decrease temperature and rotate to the left to increase temperature.
Manufacturer’s Limited Warranty PULSE Shower Spas, Inc. warrants that all ShowerSpas are free from defect in workmanship and/or materials for a period of three years from the date of purchase. This warranty extends to the original purchaser only and is non-transferable.