SPLASH Splash ShowerSpa Model #1020 - B & #1020 - S Owner's Manual Inv ig orate D ecorate Re juv e nate
Splash ShowerSpa 1020 Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Installation Prior to installation 1. Remove your showerhead and trim plate (escutcheon) from your existing shower arm. 2. Determine the length of brass NPT nipple (7, 7A) needed: a. Place mark on existing shower arm at wall surface. Unscrew shower arm from elbow in wall. b. Measure distance from mark on shower arm to end of shower arm threads. Add 1⁄2" to this measurement, then round to nearest 1⁄2". Example 1: If measurement = 11⁄4", add 1⁄2" = 13⁄4", rounded = 2" NPT nipple, this is the length needed.
Usage Care & Maintenance Turn diverter either direction to change functions or set between functions for further enjoyment. To keep your ShowerSpa looking new, wipe down after each use with a soft cotton cloth. The showerhead and body jets have ball joints, allowing you to pivot them to the desired spray angle. Protect your ShowerSpa from hard water stains and mineral deposits by periodically using an auto spray wax.