NatureRain NatureRain Combo ShowerSpa Model #1038- CH Owner's Manual
NatureRain Combo ShowerSpa 1038-CH Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Installation 1. Remove your existing showerhead (use wrench if needed). 2. Remove any Teflon or pipe sealant that may be left on the threads of your shower arm. 3. Attach ShowerSpa (1) to your existing shower arm until it is snug, using wrench if needed. DO NOT OVERTIGHTEN. 4. Insert a rubber washer into each end of the shower hose (3). 5. Attach the hex end of the shower hose (3) to the male threads on the bottom of the ShowerSpa (1). 6.
Manufacturer’s Limited Warranty PULSE Shower Spas, Inc. warrants that all ShowerSpas are free from defect in workmanship and/or materials for a period of three years from the date of purchase. This warranty extends to the original purchaser only and is non-transferable.