NIAGARA Niagara ShowerSpa Model #1048B-BN Owner’s Manual
Niagara ShowerSpa Model 1048B-BN Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Product Dimensions 450 mm 17.72 in Measured To Top Of Mount Bracket 1150 mm 45.28 in 135 mm 5.31 in 1350 mm 53.15 in 135 mm 5.31 in 660 mm 25.98 in 630 mm 24.80 in 700 mm 27.56 in Measured To Top Of Mount Bracket 325 mm 12.80 in 250 mm 9.84 in 160 mm 6.3 in 300 mm 11.81 in 70 mm 2.
Parts Legend 1. ShowerSpa 2. Hand Shower 3. Rubber Washer......7(4 extra) 4. Hand Shower Holder 5. Hand Shower Hose 6. Diverter Controls 7. Thermostatic Valve 8. Shelf 9. Wall Mount Bracket............2 10. Nylon Wall Anchor..............4 11. Mounting Screw..................4 12. Shelf Mounting Screw........4 13. Washer.................................4 14. Shelf Mounting Nut............4 15. Hand Shower Holder Nut 16.
Assembly After unpacking your ShowerSpa, some assembly is required prior to installation. Shelf Assembly (optional) 1. Line up screw holes located on bottom of ShowerSpa with screw holes located on top of shelf (8) and place screws (12) in holes. 2. Secure washer (13) and nut (14) to each screw (12). Hand Shower Holder Assembly 1. Insert hand shower holder (4) into hole located on side of ShowerSpa and secure with washer (16) and nut (15). 2. Secure nut (15) with adjustable wrench if needed. 3.
Retrofit – Existing Shower Replacement NOTE—In a remodel in which you are not replacing the finished wall surface (tile, or backing material) it is advisable to purchase a PULSE ShowerSpa model that covers the location of your existing valve assembly—either single handle or two-handle type. If your PULSE ShowerSpa model does not cover this area, you will need to either choose another PULSE ShowerSpa model that does or make necessary repairs with appropriate materials (i.e.
Usage Thermostatic Mixing Valve The Niagara ShowerSpa comes equipped with a thermostatic mixing valve to safely control water temperature. Once you set the knob to the desired operating temperature, the thermostatic mixing valve will regulate the temperature, keeping it constant even when water pressure drops inside the plumbing lines (i.e. someone flushes a toilet, etc.). The button on the knob points to the current water temperature.
Manufacturer’s Limited Warranty PULSE ShowerSpas, Inc. warrants that all ShowerSpas are free from defect in workmanship and/or materials for a period of three years from the date of purchase. This warranty extends to the original purchaser only and is non-transferable.
