Rio ShowerSpa Model #1049B-BN PW-91049-5925BRZSS Owner's Manual
Rio ShowerSpa Model #1049B-BN / PW-91049-5925BRZSS Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
250 mm 9.84 in 150 mm 5.91 in 425 mm 16.73 in 230 mm 9.06 in 230 mm 9.06 in 1219 mm 48 in 880 mm 34.65 in 1350 mm 53.15 in 925 mm 36.42 in 770 mm 30.32 in Dimensions 533 mm 21 in 394 mm 15.50 in 254 mm 10 in Top 280 mm 11.
Parts Legend 1. ShowerSpa 6. Handshower Hose 11. Wall Mount Bracket........2 2. Shower Arm Escutcheon 7. Handshower 12. Nylon Wall Anchor..........4 3. Shower Arm 8. Handshower Holder 13. Stainless Nut 4. Showerhead 9. Handshower Holder Nut 5. Rubber Washer......8(4 extra) 10. Mounting Screw..............
Assembly After Unpacking Your ShowerSpa, Some Assembly Is Required Prior To Installation Shower Arm Assembly 1. Place escutcheon (2) over threaded end of shower arm (3) and insert through shower arm hole. Use stainless nut (13) at front of panel and secure shower arm to ShowerSpa. 2. Attach hose fitting to shower arm (3) ensuring rubber washer is still in hose fitting. Do not over-tighten. Handshower Assembly 1.
nstallation New Construction or Extensive Remodel – New Finished Wall Surface 1. Prior to sheetrock, stub-out ½" hot and cold supply lines beyond finished wall surface, 4" on center. For best results, attach 90° brass fittings (available at most hardware stores) to the stub-outs maintaining ¼" – ½" of space between the fitting and finished wall. The open end of the 90° brass fittings should point down so the supply lines attach parallel to the wall. 1 2.
Usage Pressure Balance Mixing Valve The Rio ShowerSpa is equipped with a cUPC® pressure balance mixing valve to adjust water flow and temperature. The valve automatically adjusts to changes in water pressure (i.e. someone flushes a toilet), keeping your temperature constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the handle until the desired flow rate is achieved. Rotate to the right to decrease temperature and rotate to the left to increase temperature.
Manufacturer’s Lifetime Limited Warranty 1. Defects Covered; Warranty Period. Pulse Shower Spas, Inc. (“Pulse”) warrants to the original consumer purchaser who purchases this shower spa (the “Product”) for use in his or her own home, that the Product will be free from defects in material and manufacturing workmanship for as long as the original consumer purchaser owns that same home.