A L OH A Aloha ShowerSpa Model #1021- SSB Owner's Manual
Aloha ShowerSpa 1021-SSB Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Installation 1. Determine the length of brass NPT nipple (13) needed: a. Place mark on existing shower arm at wall surface. Unscrew shower arm from elbow in wall. b. Measure distance from mark on shower arm to end of shower arm threads. Add 1⁄2" to this measurement, and then round to nearest 1⁄2". Example 1: If measurement = 11⁄4", add 1 ⁄2" = 13⁄4", rounded = 2" NPT nipple, this is the length needed. Example 2: If measurement = 15⁄8", add 1 ⁄2" = 2 1⁄8", rounded = 2" NPT nipple, this is the length needed.
Usage Use the diverter valve to select what function you want to enjoy. If you want two functions to operate at the same time, position the diverter selector between the two desired functions. It is best to wipe dry the Aloha Showerspa after each use to maintain it in new looking condition. Only use mild soap and water to clean the Aloha Showerspa. Never use any abrasives or harsh chemicals as they will damage the finish and void the warranty. Manufacturer’s Limited Warranty PULSE Shower Spas, Inc.
