Installation Guide

Aloha

ShowerSpa 1021

SSB

Please Read The Following Instructions

COMPLETELY Before Beginning!

Our goal is to ensure your installation goes smoothly

and safely. Please read these instructions carefully

and follow recommendations for plumbing and

mounting. After reading instructions, if you

determine you do not have the necessary skills

and/or tools, we recommend that a licensed

plumbing contractor complete the installation.

If you encounter any problems during installation

CALL TECHNICAL SUPPORT

TOLL FREE at 888-785-7320

Before returning your ShowerSpa to the store

You Will Need The Following Tools

Drill with 3/16" (5mm) tile/masonry bit, Adjustable wrench,

Hammer, Phillips screwdriver and Pencil

Parts Legend

1. Aloha Showerspa ......................... 1

2. Shower Arm ................................. 1

3. Rubber Washer 6mm ................... 1

4. Showerhead ................................. 1

5. Top Cover ..................................... 1

6. Brass Nut ...................................... 2

7. Rubber Washer 2mm ................... 3

8. 90° Fitting .................................... 2

9. Compression Nut ......................... 2

10. Rubber Washer w/ Screen ......... 1

11. Retaining Washer ...................... 1

12. Mounting Plate .......................... 1

13. 2-1/2" Brass NPT Nipple ............. 1

14. Two Faced Tape ......................... 1

15. Wall Anchor ............................... 6

16. 1" Nail ......................................... 6

17. Hand Shower Mount ................ 1

18. Nut 4mm .................................... 2

19. Non Slip Washer ........................ 2

20. 1-3/8" Machine Screw ............... 2

21. Hand Shower ............................. 1

22. Hand Shower Hose .................... 1