SANTA CRUZ Santa Cruz ShowerSpa Model #1033 Owner's Manual
Santa Cruz ShowerSpa Model #1033 Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Stub-Out Location ESTIMATED MOUNTING HEIGHT AND STUB-OUT LOCATION FOR INDIVIDUALS 5'8"– 6'2" 1" 61" 1" 31¼" 90˚ Fittings Not Included 3" 38" Mark bottom of ShowerSpa 21" r loo F hed s i n Fi 3
Parts Legend 4 1. ShowerSpa 4. Hand Shower Hose 8. Mount Bracket................ (2) 2. Hand Shower 5. Hand Shower Holder 9. Hand Shower Hose Outlet 3. Rubber Washer............... (6) (3 extra) 6. Mounting Screw............. (6) 10. Thermostatic Valve 7. Nylon Anchor.................. (6) 11.
Assembly After installing your ShowerSpa, some assembly is required Hand Shower Holder Installation 1. Locate the desired mounting location of the hand shower holder (6) and mark the holes. For best results, mount the hand shower holder on the same side as the hand shower hose outlet (9). 2. Drill ¼" holes through wall surface using a masonry bit. Drill slowly through wall surface to avoid cracking and chipping. 3.
Installation – Retrofit Existing Shower Replacement NOTE—In a remodel in which you are not replacing the finished wall surface (tile, or backing material) it is advisable to purchase a PULSE ShowerSpa model that covers the location of existing valve assembly—either single handle or two-handle type. If your PULSE ShowerSpa model does not cover this area, you will need to either choose another PULSE ShowerSpa model that does or make necessary repairs with appropriate materials (i.e.
Usage Thermostatic Mixing Valve The Santa Cruz ShowerSpa comes equipped with a thermostatic mixing valve to safely control water temperature. Once you set the knob to the desired operating temperature, the thermostatic mixing valve will regulate the temperature, keeping it constant even when water pressure drops inside the plumbing lines (i.e. someone flushes a toilet, etc.). The button on the knob points to the current water temperature.
Manufacturer’s Limited Warranty PULSE Shower Spas, Inc. warrants that all ShowerSpas are free from defect in workmanship and/or materials for a period of three years from the date of purchase. This warranty extends to the original purchaser only and is non-transferable.