TROPICANA Tropicana ShowerSpa Model #1039W-BN Owner’s Manual
Tropicana ShowerSpa Model 1039W-BN Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
250 mm 9.84 in 200 mm 7.87 in 485 mm 19.09 in 230 mm 9.06 in 230 mm 9.06 in 880 mm 34.65 in 1350 mm 53.15 in 280 mm 11.02 in 865 mm 34.06 in 770 mm 30.32 in 140 mm 5.50 in Product Dimensions 254 mm 10 in 597 mm 23.50 in Top Top 150 mm 5.
Parts Legend 2 1 3 5 11 10 4 12 9 7 5 8 1. ShowerSpa 6 2. Shower Arm 3. Shower Arm Insert 4. Shower Head 5. Rubber Washer......8(4 extra) 6. Hand Shower Hose 7. Hand Shower 8. Hand Shower Holder 9. Hand Shower Holder Nut 10. Mounting Screw..................4 11. Wall Mount Bracket............2 12. Nylon Wall Anchor..............
Assembly After unpacking your ShowerSpa, some assembly is required prior to installation. Shower Arm Assembly 1. Slide shower arm into shower arm insert (3) and tighten. 2. Make sure that rubber washer (5) is in shower head (4) and screw shower head onto show arm (2). Hand Shower Holder Assembly 1. Insert hand shower holder (8) into hole located on side of ShowerSpa and secure with nut (9). 2. Secure nut (9) with adjustable wrench if needed.
Retrofit – Existing Shower Replacement NOTE—In a remodel in which you are not replacing the finished wall surface (tile, or backing material) it is advisable to purchase a PULSE ShowerSpa model that covers the location of your existing valve assembly—either single handle or two-handle type. If your PULSE ShowerSpa model does not cover this area, you will need to either choose another PULSE ShowerSpa model that does or make necessary repairs with appropriate materials (i.e. wallboard, tile, fiberglass, etc).
Usage Pressure Balance Mixing Valve The Tropicana ShowerSpa is equipped with a cUPC® pressure balance mixing valve to adjust water flow and temperature. The valve automatically adjusts to changes in water pressure (i.e. someone flushes a toilet), keeping your temperature constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the handle until the desired flow rate is achieved. Rotate counter-clockwise to decrease temperature and rotate clockwise to increase temperature.
Manufacturer’s Limited Warranty PULSE ShowerSpas, Inc. warrants that all ShowerSpas are free from defect in workmanship and/or materials for a period of three years from the date of purchase. This warranty extends to the original purchaser only and is non-transferable.