AquaPower Shower System Model #1054-CH PW-91054-7025CP Owner's Manual
AquaPower Shower System 1054-CH / PW-91054-7025CP Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Installation Instructions 1 4 Remove existing shower head and shower arm. Place wall mount plate(5) over the inlet fitting(4) and make sure it is leveled. Mark holes with pencil. 2 5 CAUTION: LIVE PLUMBING Optional Apply plumber's tape on inlet fitting(4). If you need to use a nipple extension, be sure to also apply plumber's tape. Insert inlet fitting(4) onto existing water supply. Use wrench to secure. 3 Drill hole previously marked and add anchors(7).
7 8 Step 4 Step 3 Step 3 Step 1 Step 2 Step 2 Step 4 Magnetic handshower holder Step 4 Step 1: Slide shower body cover(3) onto shower arm(2). Step 2: Secure shower arm(2) onto shower body(11). Step 3: Place and secure shower body cover(3). Step 4: Attach swivel joint(9), hose(10), showerhead(1) and handshower(15). Product fully assembled. MANUFACTURER'S LIFETIME LIMITED WARRANTY 1. Defects Covered; Warranty Period: Pulse Shower Spas, Inc.
