Installation Guide

3
Installation Instructions
1
2
Remove existing shower head and shower arm.
Apply plumber's tape on inlet tting(4). If you need to use a nipple
extension, be sure to also apply plumber's tape. Insert inlet tting(4)
onto existing water supply. Use wrench to secure.
Inlet tting(4) installed.
3
6
5
Drill hole previously marked and add anchors(7). Place wall mount
plate(5) over the holes and secure with screws(8).
Slide shower body(11) over wall mount plate(5) screws and secure
with nut(12).
Place wall mount plate(5) over the inlet tting(4) and make sure it is leveled.
Mark holes with pencil.
CAUTION: LIVE PLUMBING
Side View
Optional
4