Specifications

EMC-CS-2009.1
© Copyright Ford Motor Company – All Rights Reserved Page 39 of 121
February 11, 2010
Figure 11-4: RI 114 ALSE Test Setup for Bands 6 and 7
12
11
1
2
12
11
10
9
6
1000 ± 10 mm
1
8
100 ± 10
1000 min
5
11
2
7
3
500 min
1500 ± 75 mm
4
+
-
1
3
1000 ± 50
Front View Side View
250 min
3
4
+
-
4
+
-
+
-
6
5
5
100 ± 10
Key:
1. DUT 7. Support Equipment
2. Test Harness 8. Double Shielded Coaxial Cable (e.g. RG 223)
3. Load Simulator 9. Bulkhead Connector
4. Automotive Battery 10. RF Generation Equipment
5. Dielectric Support ((ε
r
≤ 1.4)
11. RF absorber Material
6. Transmit Antenna
11.5.2 Test Procedures
The DUT operating mode(s) exercised during testing shall conform to that delineated in the EMC test plan.
11.5.2.1 ALSE Method
Testing shall be performed using the substitution method. Refer to ISO 11452-2 for field characterization procedures for
Bands 4 and 5. Refer to Annex A for field characterization procedures for Bands 6 and 7.