Tru-Temp Valve Tru-Temp Pressure Balance 1/2" Rough-In Valve Model #3001-RIV-PB Owner’s Manual
Rough-In Valve Model #3001-RIV-PB Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Product Dimensions 3½" 5" 7¼" 4½" 7¼" 4½" 5" 3
Parts Legend 1. Valve Body 2-8. Integral Stop/Shutoff Assembly 9. Pressure Balanced Cartridge 10. Limit Stop 11. Valve Sleeve 12. Trim Sleeve 13. Trim Nut 14. Valve Handle 15. Set Screw 16. Set Screw Cover 17. Friction Ring 18. Trim Plate 19. Plaster Guard 20.
Installation Valve Installation 1. TURN OFF WATER SUPPLY TO SHOWER. Typically there is a gate valve where the water main enters the house. Turning the water valve off at hot water tank does not turn off cold water supply line. 2. Make certain water is completely turned off to both hot & cold supply lines of shower. Turn shower valve on, both hot and cold, to VERIFY WATER SUPPLY IS OFF.
Manufacturer’s Limited Warranty PULSE ShowerSpas, Inc. warrants that all PULSE products are free from defect in workmanship and/or materials for a period of three years from the date of purchase. This warranty extends to the original purchaser only and is non-transferable.