User Manual

8
Command Function Description Feedback Code
1A1. Switching the audio input to input 1 A: 1
2A1. Switching the audio to input 2 90Wx2
3A1. Switching the audio to input 3 180W
0A0. Mute audio of MIC and line out Mute
1A0. Mute audio of MIC Mute MIC
2A0. Mute audio of line out Mute line
3A0. Enable noise gate Gate on
4A0. Disable noise gate Gate o
0A1. Unmute audio Unmute audio
600% Checking the working status A: 1
Volume of MIC: 50
Volume of line: 50
Bass of line: 4
Treble of line: 4
Ducking o
601% MIC volume up Volume of MIC: 51
602% MIC volume down Volume of MIC: 51
603% Line volume up Volume of line: 51
604% Line volume down Volume of line: 51
605% Bass level up Bass of line: 4
606% Bass level down Base of line: 4
607% Treble level up Treble of line: 4
608% Treble level down Treble of line: 4
609% Initialization, back to the default setting Init OK
610% Enable/disable the ducking function Ducking o/ducking on
4[x][x]% Preset the volume level of ducking function.
[xx] ranges from [00] to [60]. 61 degress
in total
Ducking of line: 50
5[x][x]% Preset MIC volume, [xx] ranges from [00]
to [60]. 61 degrees in total
Volume of MIC: 50
7[x][x]% Preset line volume, [xx] ranges from [00]
to [60]. 61 degrees in total
Volume of line: 50
8[x][x]% Preset the bass level, [xx] ranges from [00]
to [08]. 9 degrees in total
Bass of line: 4
9[x][x]% Preset the trebel level, [xx] ranges from
[00] to [08]. 9 degrees in total
Treble of line: 4
RS232 CONTROL
Communication Protocol: RS232
Baud Rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none