Model XC-QL4 4-Channel 6/12V DC Charger Multiplier FEATURE AND USE GUIDE
Model XC-QL4 Feature and Use Guide Table of Contents Features .................................................................... Inside front cover User Guide ............................................................................... 1 – 3 Specifications ......................................................................................3 Battery Charger Use..........................................................................3 FAQs ..............................................................
User Guide Do not operate without first reading these important safety notices and use instructions. Additionally, do not use this without first reading important safety notices and use instructions that come with your battery charger/maintainer and your battery. NOTE: As part of good safety routine, this product is designed for use only with automatically controlled charger maintainers and is optimized for use with the Xtreme Charge family of products.
C. A blinking green LED light will indicate the first battery connected to the QuadLink. Once additional batteries are connected, a solid glowing green LED light will verify connection to all additional connected stations. Once the charger is connected to the QuadLink and plugged into the AC power source, the charging cycle begins. From this point forward, the station or battery that is currently “live” or being charged is indicated by a blinking green LED light. D.
3. If for any reason the QuadLink is not unplugged from the DC power source and allowed to reset during removal of a battery, the LED channel indicator will remain illuminated until the next cycle provides a circuit verification test indicating an open circuit. The output previously associated with the removed battery will then in turn be skipped. 4.
Frequently Asked Questions 1. Can the QuadLink be used with a Solar Charger? YES, if the Solar Charger uses the same connector, is 6V or 12V DC and does not exceed 8 Amp output. 2. Is the QuadLink water resistant? YES, it is water resistant but not waterproof. It cannot be submerged or left in pooled water or driving rain. Safety dictates that one should never use an electrical product in wet conditions. 3.
5-Year Limited Warranty PulseTech Products Corporation i What Does This Warranty Cover? This warranty covers any defects in workmanship or materials in the product under normal use and service. How Long Does The Coverage Last? This warranty runs for five (5) years from the date of purchase. What Will PulseTech Do? PulseTech will, at its option, repair the unit or replace the unit with a remanufactured unit at no charge.
PRODUCTS & ACCESSORIES 12V Xtreme Charger w/Pulse Maintenance Ideally suited for AGM and Maintenance-Free batteries. Increases the duty and life cycle of all 12V batteries up to five times longer. Part #: 100X010 Model: XC-100-P Battery Lead with Clips This 7.5-amp fuse-protected cable is supplied with a quick-disconnect terminal. Lead is 2 feet long. Quick Mount Wall Bracket Part #: 100X808 Model: XC-QM “Leave-On” Battery Lead with Lugs Xtreme Charge® 7.