Product Manual

4
● BEFORE STARTING COMPRESSOR，PULL SAFETY VALVE RING TO MAKE SURE
THE VALVE MOVES FREELY。THE SAFETY VALVE IS FACTORY INSTALLED TO
PREVENT THE AIR RECEIVER FROM DAMAGE SHOULD MALFUNCTION OCCUR IN
THE PRESSURE SWITCH，IT IS FACTORY SET AT A SPECIFIC LIMIT FOR YOUR
PARTICULAR MODEL，AND SHOULD NEVER BE TAMPERED WITH， ADJUSTMENT
BY USER WILL AUTOMATICALLY VOID WARRANTY。
1-4：
：：
：RISK OF BURNS
● HOT SURFACE CAN CAUSE SERIOUS INJURY ，NEVER TOUCH ANY EXPLOSED
METAL PARTS ON COMPRESSOR DURING OR IMMEDIATELY AFTER
OPERATION，TOUCHING THESE AREAS MAY CAUSE SEVER BURNS。
● DO NOT REACH AROUND PROTECTIVE SHROUNDS OR ATTEMPT MAINTENANCE
UNTIL UNIT HAS BEEN ALLOWED TO COOL。
1-5：
：：
：RISK OF BREATHING
● DO NOT USE COMPRESSORED AIR FOR BREATHING，WHEN SPRAING USE
RESPIRATORY PROTECTION IN A WELL VENTILED AREA。
● COMPRESSOR AIR FROM THE UNIT MAY CONTAIN POISONOUS VAPOURS WHICH
IS NOT SUITABLE FOR INHALEING AND COULD BE HARMFUL TO YOUR HEALTH。
● WORK IN AN AREA WITH GOOD CROSS-VENTILATION。
1-6：
：：
：RISK FROM MOVING PARTS
● UNIT STARTS AUTOMATICALLY， DO NOT OPERATE WITH GUARDS OR COVERS
REMOVED OR BROKEN。
● ANY REPAIRE REQUIRED ON THE PRODUCT SHOULD BE PERFORMED BY
AUTHORIZED SERVICE CENTER PERSONNEL。
● MOVING PARTS DO NOT TOUCH。
1-7：
：：
：RISK FROM FLYING OBJECTS
● ALWAYS WEAR ANSI Z87.1 APPROVED SAFETY GLASSES WITH SIDE SHIELDS
WHEN USE THE AIR COMPRESSOR。ALWAYS WEAR PROPER SAFETY
EQUIPMENT WHILE USING COMPRESSORED AIR。
● DO NOT DIRECT AIR STREAM TOWARD ANY PARTS OF THE BODY OR AT OTHER
PEOPLE。
● UNPLUG POWER CORD AND DRAIN ALL AIR PRESSURE FROM TANK BEFORE
SERVICING AND AFTER EACH USE。
1-8：
：：
：RISK OF PROPERTY DAMAGE WHEN TRANSPORTING COMPRESSOR
● ALWAYS PLACED COMPRESSOR ON A PROTECTIVE MAT WHEN TRANSPORTING
TO PROTECT AGAINST DAMAGE TO VEHICLE FROM LEAKS。
● NEVER OPERATE COMPRESSOR ON A ROOF OR OTHER ELEVATE POSITION。
● ALWAYS OPERATE COMPRESSOR IN A STABLE POSITION TO PREVENT
ACCIDENTAL MOVEMENT OF THE UNIT。