Product Manual

2：

：：

： GENERAL DESCRIPTION OF AIR COMPRESSOR

To compress air，the piston move up and down in the cylinder，During the down-stroke，air is

drawn in through the inlet valve，The discharge valve remains closed，On the up-stroke of the

piston，air is compressed。The inlet valve closes and compressed air is forced out through the

discharge valve、through the check valve and into air receiver tank。Working air is not

available until the compressor has raised the air receiver pressure above that required at the

air service connection。The air inlet filter openings must be kept clear of obstructions。Your air

compressor can be used for operating paint spray guns、air tools、caulking guns、grease

guns、air brushes、sandblaster、or inflating tires and plastic toys、spraying weed killer and

insecticides、etc., An air regulator is usually necessary for most of these application。

3：

：：

：ON RECEIPT INSPECTION

Each PUMA air compressor outfit is carefully factory tested and inspected before shipment。

Every attempt is made to ensure safe and complete shipment of our products。 It is the

responsibility of the receiver of the goods to ensure the products has been shipped in full and

arrival in suitable condition to avoid expenses being incurred to correct such problems。With

improper handling，damage may result in transit and cause problems in compressor operation。

4：

：：

：GENERAL REQUIREMENT

It is your responsibility to ensure air compressor is installed correctly，as well as maintained and

serviced on a regular basis。Information has been included in this booklet outlining the

suggested air compressor maintenance schedules and a trouble shooting guide， It is important

that you read this information and keep it in a safe place for future reference。

5：

：：

：INSTALLATION

5.1：

：：

：MECHANICAL

Located the compressor in a clean、dry and well ventilated area。 The compressor should be

located 12 ~ 18 inches from a wall or any other obstruction that would interfere with the air flow

through the pump flywheel，Place the air compressor on a firm and level surface。 The air

compressor is designed with heat dissipation fins that allow for proper cooling。Keep the fins

and other parts that collect dust or dirt clean。 A clean compressor runs cooler and provides

longer service。 Allow room for easy access to the air compressor for maintenance and service

work。