Owner's manual

- 1 -
GENERAL INFORMATION
SAFETY INFORMATION
WARNING
To ensure safe and reliable operation, please carefully read this service and
installation manual in its entirety before installing and/or using this product.
Reasonable care and safe methods in according with sound plumbing practices
should be strictly adhered to. Before installation, refer to and understand all
relevant local plumbing and electrical codes.
DO NOT THROW AWAY THIS MANUAL. Keep it in a safe place so that
you may refer to it for periodic service and maintenance.
Always disconnect the power before servicing this product. Failure to
do so may result in serious injury or death. Consult with a qualied
electrician if you are unsure of the power source or cannot determine
whether power has been properly disconnected.
Please review and follow the safety information listed below.
• Risk of electric shock. Always disconnect power before servicing.
• Not to be used as a grid-tie inverter.
• Do not make any electrical connections while standing on a wet surface or
with wet hands.
• Electrical connections and wiring for a pump installation should only be made
by qualied personnel.
• This equipment is equipped with an approved 3-conductor cord and 3-prong
grounding-type plug, and is only for use with a grounded 110/120VAC
receptacle.
• For proper and safe operation, the temperature range where this unit is to
be installed is 14°F to 120°F and well ventilated. Avoid installing in direct
sunlight.
• DO NOT bypass grounding wires or remove the ground prong from the plug.
• DO NOT use an extension cord.
• NEVER lift this product by the electrical power cord.
• NEVER attempt to open or service this unit.
• DO NOT store anything on top of this unit. This surfaces of this unit may
become hot to the touch, particularly during periods of high demand / use.