SUMP PUMP Requires WiFi SMART OUTLET WiFi Configuration Button Your Sump Pump plugs into the top outlet Additional outlet for backup pump, dehumidifier, etc. Outlet ring glows to show WiFi connection and pump status Connection for High Water Sensor PUMP SPY www.pumpspy.
IMPORTANT! READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT. SPECIFICATIONS POWER SUPPLY REQUIREMENTS INPUT 120V, 15A, 60Hz OUTPUT 120V, 15A, 60Hz Wi-Fi Radio 802.11 a/b/g/n 2.4 GHz Operating Temperature Storage Temperature Relative Humidity 0 to 50 C 0 to 70 C 0 to 90% WARNING The PumpSpy Smart Outlet is for residential indoor use only.
Inspect the power outlet you intend to plug your PumpSpy Smart Outlet into. If there is any damage or excessive wear on the outlet, please contact an electrician. To reduce any risks of damage please read and understand any safety and operation instructions included with the sump pump and other devices you wish to use with your PumpSpy Smart Outlet. Do not plug a sump pump or any other device into the PumpSpy Smart Outlet if the device’s ground prong has been removed or damaged.
WIFI SETUP INSTRUCTIONS STEP 1: Download and install the PumpSpy App from the App Store. STEP 2: Open the app and create a new PumpSpy account or login to your existing PumpSpy account. STEP 3: Create a new location. • If you are not already on the “New Location” page, navigate to “LOCATIONS” using the bottom navigation bar. Press the “+” in the top right corner to add a new location.You may use an existing location if applicable. • Enter the location information. • Press “DONE” in the top right corner.
Contact Tech Support: (833) 786-7779 support@pumpspy.com 1. 2. PumpSpy 3. 4. 5. 6.
WIFI SETUP INSTRUCTIONS STEP 1: Download and install the PumpSpy App from Google Play. STEP 2: Open the app and create a new PumpSpy account or login to your existing PumpSpy account. STEP 3: Create a new location. • If you are not already on the “New Location” page, navigate to “LOCATIONS” using the bottom navigation bar. Press the “+” in the top right corner to add a new location.You may use an existing location if applicable. • Enter the location information. • Press “DONE” in the top right corner.
Contact Tech Support: (833) 786-7779 support@pumpspy.com 1. 2. PumpSpy 3. 4. 5. 6.
MANUAL SETUP INSTRUCTIONS ADD DEVICE MANUALLY If you are having issues with setting up your PumpSpy device via the app, you can manually setup the device. This process works on all Apple and Android devices. • O n your Apple/Android device, go to Wi-Fi settings and connect to the PumpSpy device’s Wi-Fi network • I f your device warns you that there is no internet connection available, that is normal. Stay connected to the PumpSpy Wi-Fi network.
Contact Tech Support: (833) 786-7779 support@pumpspy.com • O nce successfully connected, open a web browser on your Apple/Android device • E nter the following address: 10.10.115.1/config/scan_page_outer.html • S elect your Wi-Fi network from the displayed list of available networks • Enter your network password • T he screen will go dark and a message will be displayed. Close your browser.
INSTALLATION - PART 2 4. C ONNECT OTHER DEVICES TO THE LOWER STANDARD OUTLET, IF APPLICABLE. 5. I NSTALL THE HIGH WATER SENSOR, CLAMPING TO THE DISCHARGE PIPE OF YOUR SUMP PUMP. The High Water Sensor be mounted 1” higher than the “on” level of main sump pump A. Adjust the position of the mounting bracket so the high water sensor does not interfere with the operation of the main sump pump switch. B.
This device complies with part 15 of the FCC and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
LIMITED 3 YEAR WARRANTY WHAT THIS WARRANTY COVERS When used and maintained in normal use and in accordance with the Installation and Operating Instructions, your PumpSpy® product is warranted against original defects in material and workmanship for a full three years from date of purchase (the “Warranty Period”). During the warranty period, PumpSpy will repair or replace at no cost to you, to correct such defects in products found upon examination by PumpSpy to be defective in materials or workmanship.
