Installation Guide

2
IMPORTANT!
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
SPECIFICATIONS
WARNING
The PumpSpy Smart Outlet is for
residential indoor use only.
To reduce the risk of electrical shock, this device
must be properly grounded in accordance with the
National Electric Code (NEC) and all applicable
state and local codes and ordinances. The
receptacle used with the PumpSpy
®
Smart Outlet should be
protected with a Ground Fault Circuit Interrupter (GFCI).
Never remove the ground prong from the PumpSpy Smart
Outlet, or use an adapter that eliminates the ground prong.
Always plug your PumpSpy Smart Outlet directly into your wall
power outlet. Do not use an extension cord. Extension cords
could present a safety hazard if not properly sized, become
damaged or the connection falls into the sump pit.
Conrm that your PumpSpy Smart Outlet is completely plugged
into your wall power outlet and secured with the included
hardware. Your device should sit as ush as possible with the
wall outlet. If it seems loose, please contact an electrician.
POWER SUPPLY REQUIREMENTS
INPUT 120V, 15A, 60Hz
OUTPUT 120V, 15A, 60Hz
Wi-Fi Radio 802.11 a/b/g/n 2.4 GHz
Operating Temperature 0 to 50 C
Storage Temperature 0 to 70 C
Relative Humidity 0 to 90%