Installation Guide

3
Inspect the power outlet you intend to plug your
PumpSpy Smart Outlet into. If there is any damage
or excessive wear on the outlet, please contact an
electrician.
To reduce any risks of damage please read and understand any
safety and operation instructions included with the sump pump
and other devices you wish to use with your PumpSpy Smart
Outlet.
Do not plug a sump pump or any other device into the PumpSpy
Smart Outlet if the device’s ground prong has been removed or
damaged.
Do not plug a sump pump or any other device into the PumpSpy
Smart Outlet if the device’s power cord is cut or damaged.
Do not attempt to disassemble or open the PumpSpy Smart
Outlet. There are no eld serviceable parts or repair options.
UNPACKING
Inspect this device before beginning installation. Occasionally,
products are damaged during shipping. If the outlet or any
components are damaged, contact PumpSpy Tech Support:
[phone] | [e-mail]
INSTALLATION - PART 1
BEFORE INSTALLING THE PUMPSPY SUMP PUMP SMART
OUTLET, VERIFY THAT YOUR SUMP PUMP IS IN GOOD
WORKING CONDITION! REPLACE IF NECESSARY!
1. UNPLUG YOUR SUMP PUMP AND ANY OTHER CORDS
FROM THE WALL A/C OUTLET
2. PLUG THE SMART OUTLET INTO WALL A/C OUTLET
A. PumpSpy recommends removing the outlet cover screw and then
securing the Smart Outlet to the power outlet with the included
mounting screw. If removing the screw is not possible or desired, make
sure the outlet is rmly plugged into the power outlet and is ush as
possible with the wall.
B. The PumpSpy Smart Outlet is not designed to be used with extension
cords or power strips. If you have multiple devices that require the use of
a power strip, a power strip can be connected to the lower plug outlet on
the Smart Outlet.
Follow the WiFi setup instructions before continuing.
Instructions for Apple devices: Pages 4 - 5
Instructions for Android devices: Pages 6 - 7
After your device is connected to WiFi, continue to Page 10 to
nish installation.