Installation Guide

9
• Once successfully connected, open a web browser
on your Apple/Android device
• Enter the following address:
10.10.115.1/cong/scan_page_outer.html
• Select your Wi-Fi network from the displayed
list of available networks
• Enter your network password
• The screen will go dark and a message will
be displayed. Close your browser.
• Your PumpSpy devices Wi-Fi indicator will turn red
for several seconds, then green once successfully
connected to PumpSpy’s servers. If it stays red after
60 seconds, start over. (Make sure you enter the
correct Wi-Fi password!)
• Once the Wi-Fi indicator is green, open the
PumpSpy app and select “Connect Device Manually”
• Enter your PumpSpy device’s 15-digit serial number
and press “Submit”
Contact Tech Support:
[phone]
[e-mail]