USE AND CARE GUIDE SUMP PUMP VERTICAL FLOAT SWITCH VS-100
TOOLS REQUIRED: Safety Goggles Flathead Screwdriver Tape Measure SAFETY INFORMATION Always disconnect power to your pump and release pressure before servicing! SPECIFICATIONS RVFS10 10’ Power Cord 10 Amp @ 120 VAC RVFS20 20’ Power Cord 10 Amp @ 120 VAC RVFS30 30’ Power Cord 10 Amp @ 120 VAC Rating : 10 AMP @ 120 VAC
INSTALLATION INSTRUCTIONS Float Switch Plug Pump Plug Locate position for float switch Mounting Bracket Lift Rod Float Hose Clamp Grommet stopper Activation Level Pumping Range Mount float switch to discharge pipe, tightening the hose clamp with a flat-head screwdriver Fill the sump basin with water. Verify that the pump turns on and off at the desired levels.
Limited Three-Year Warranty WHAT THIS WARRANTY COVERS When used and maintained in normal use and in accordance with the Installation and Operating Instructions, your PumpSpy® product is warranted against original defects in material and workmanship for a full three years from date of purchase (the “Warranty Period”). During the warranty period, PumpSpy will repair or replace at no cost to you, to correct such defects in products found upon examination by PumpSpy to be defective in materials or workmanship.
