Owner's manual

ManualsBrandsPumptec ManualsHardware110 GALLON FRESH WATER TANK

































Version 022013

Pumptec, Inc. | 700 McKinley St. NW, Anoka, MN 55303 | 763-433-0303 | www.pumptec.com









110 GALLON

FRESH WATER TANK

Summary of content (5 pages)

PAGE 1
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage, which Pumptec Inc. assumes no liability! Retain instructions for future reference.
PAGE 2
110 GALLON FRESH WATER TANK Pumptec Operating Instructions and Parts Manual Items shown are not to scale Description part no Qty Description part no Qty O-Ring , 1-116. Buna C0100-1116 1 Gate Valve, 1.5M x 1.5F Thread C-GV-1.
PAGE 3
110 GALLON FRESH WATER TANK Pumptec Operating Instructions and Parts Manual INSTALLATION Wheel Well Support Assembly Position the tank in the vehicle. The Lower Support Assembly plates shown in Figure 1 are engineered and designed to support the tank using the wheel well. Center the top plate on top of the wheel where you want the supports placed. Mark the 3 holes positions on the wheel well where they will be drilled.
PAGE 4
110 GALLON FRESH WATER TANK Pumptec Operating Instructions and Parts Manual Installing the Tank into Vehicle Move the tank into the vehicle and place it onto the installed Lower Support Assembly. There is a single hole on top of the Upper Support Bracket attached to the top of the tank as seen in Figure 5. Insert the threaded Rod through the hole and thread it into the Lower Support Assembly. Align the holes on the Upper and Lower Supports to keep rod vertical.
PAGE 5
Pumptec Operating Instructions and Parts Manual 110 GALLON FRESH WATER TANK LIMITED WARRANTY Pumptec ONE-YEAR LIMITED WARRANTY. Pumptec PluNger PumPS, mODelS COVereD IN THIS mANuAl, Are WArrANTeD BY Pumptec, TO THe OrIgINAl uSer AgAINST DeFeCTS IN WOrKmANSHIP Or mATerIAlS uNDer NOrmAl uSe FOr ONe YeAr AFTer DATe OF PurCHASe. ANY PArT WHICH IS DeTermINeD TO Be DeFeCTIVe IN mATerIAl Or WOrKmANSHIP AND reTurNeD.