Manual

ManualsBrandsPumptec ManualsPumps114T SERIES

        













                





Version 012313

Pumptec, Inc. | 700 McKinley St. NW, Anoka, MN 55303 | 763-433-0303 | www.pumptec.com

PERFORMANCE FEATURES



























PUMP SERIES 114T

Summary of content (11 pages)

PAGE 1
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage in which Pumptec, Inc. will not assume any liability for! Retain instructions for future reference.
PAGE 2
PUMP SERIES 114T Pumptec Operating Instructions and Parts Manual Unpacking Remove all packing materials. Carefully remove the plunger pumps from the shipping carton. Inspect for any damage that may have occurred during transit. Check for any loose, missing or damaged parts. The contents includes 1 item: Pumptec pump and motor unit assembly Specifications Maximum specifications refer to individual performance levels. Maximum performance ratings are maximums and may be conditional on other factors.
PAGE 3
PUMP SERIES 114T Pumptec Operating Instructions and Parts Manual warning! Any wiring of pumps should be performed by a qualified electrician. CAUTION! submersed. These pumps are not intended to be Pumptec, Inc. is not responsible for losses, injury, or death resulting from a failure to observe these safety precautions, misuse or abuse of pumps or equipment. installation moUnTing Pump motor set can be mounted in any position EXCEPT with pump head higher than motor.
PAGE 4
PUMP SERIES 114T Pumptec Operating Instructions and Parts Manual must have a pressure regulating device installed as a safety device. Fluid can enter a pump either from a filtered tank or pressurized fluid line. It is common to use a tank with pumps that are mounted above the pump. Filtration is important to maintain proper function of the pump and system. The extent of filtration may be greater based upon some uses such as misting with ultra-fine nozzles.
PAGE 5
Pumptec Operating Instructions and Parts Manual SYSTem deSign A pump is the heart of every system and proper selection is critical to equipment function and durability. If a pumping set with excess flow is chosen, then energy and fluid is wasted. If excess pressure results, then equipment effectiveness can decrease and so can pump life. TYPiCAl APPliCATionS And THeir PerFormAnCe ConSiderATionS PRESSURE CLEAning The optimal combination of PSI and GPM for cleaning is a ratio of 1 GPM for every 300-400 PSI.
PAGE 6
PUMP SERIES 114T Pumptec Operating Instructions and Parts Manual nozzle Performance Chart Flow rATe vS. PreSSUre gPm (gallons per minute) @ PSi (pounds per square inch) PSi SS TiP # 60 80 100 200 300 400 500 60 80 100 200 300 400 600 2 0.25 0.28 0.32 0.45 0.55 0.64 0.71 3 0.37 0.42 0.47 0.67 0.82 0.96 1.10 4 0.49 0.57 0.63 0.89 1.10 1.26 1.40 6 0.73 0.85 0.95 1.34 1.64 1.90 2.10 8 0.98 1.13 1.26 1.79 2.20 2.52 2.80 10 1.22 1.41 1.58 2.24 2.
PAGE 7
PUMP SERIES 114T Pumptec Operating Instructions and Parts Manual maintenance diSASSemBlY And reASSemBlY inSTrUCTionS (Refer to Schematic) 1. Remove pump from motor using a 3/16” hex wrench. Remove remaining bolts from manifold of pump. Place Manifold to side as a reference for re-assembly. seal and guide into seal bore. Remove guide and verify that o-ring and seal are properly installed without bulges or creasing. Slide the retaining plate back into place. Figure 4 6.
PAGE 8
PUMP SERIES 114T Pumptec Operating Instructions and Parts Manual 9. Place manifold on top of plunger and head assembly. It may be necessary to move heads on plunger to have valves align with valve pockets on manifold. Be careful to not lose the o-rings or valves in the manifold during re-assembly. You may hear a click when everything is aligned. 10. Place nut in to hex cavity behind head while inserting shorter bolts and washer assembly into manifold.
PAGE 9
PUMP SERIES 114T Pumptec Operating Instructions and Parts Manual Troubleshooting Chart Symptom Possible Cause(s) Corrective Action No water flow 1. Tank is empty or water is not turned on 1. Fill tank or turn on water supply 2. Filter clogged 2. Clean filter 3. Pump valves clogged or damaged 3. Examine valves and clean or replace 4. Pump has lost prime 4. Follow priming procedure 1. Worn nozzle 1. Replace nozzle with new one of same Low pressure size 2.
PAGE 10
PUMP SERIES 114T Pumptec Operating Instructions and Parts Manual Repair Parts Illustration for Plunger Pump Description KIT A, 114T repair Parts list for Plunger Pump Part No. Qty Description 10005 KIT B Part No. Qty 10014 Plunger 1 Poppet Valve 4 O-Ring, 1-117 2 O-Ring, 1-116 4 Seal Ring, 1-124 2 Spring Valve 4 Plunger Guide 2 Head * 2 Manifold * 1 ( ) Sold only as part of a kit. | (*) Not part of a kit, for identification only.
PAGE 11
Pumptec Operating Instructions and Parts Manual PUMP SERIES 114T LIMITED WARRANTY Pumptec ONE-YEAR LIMITED WARRANTY. Pumptec PluNger PumPS, mODelS COVereD IN THIS mANuAl, Are WArrANTeD BY Pumptec, TO THe OrIgINAl uSer AgAINST DeFeCTS IN WOrKmANSHIP Or mATerIAlS uNDer NOrmAl uSe FOr ONe YeAr AFTer DATe OF PurCHASe. ANY PArT WHICH IS DeTermINeD TO Be DeFeCTIVe IN mATerIAl Or WOrKmANSHIP AND reTurNeD.