3. Product assembly 3.1 Charge station assembly 1} Lay the charge station on flat floor that vertical to the wall. No obstacle in a distance of tm From left to right, and 1.5m in front of the station. Press the station to stick to the fer.
3.2 install and use water tank Step 1: fill in water from Water fling nozzle Sta 2: sea! the Water filling nozzle Step 3: stick the mop Step 4: stuck water tank to main body. Note: Remove water lank while charging. Char most use water tank on blanket.
.3 Power on Place the host on tha charging stand of the power adapter, pass the dust box eject button in the riddle of tha dust box to remove the dust box, push the switch button located in the main unit te “en”, put it back into the dust boy, long press the start button on the main unit for 3 seconds, and wait for about 20 seconds after the device muted on {the voice prompt “ia Wang is ready”), you can operate.
. Using product 4.1 Buttons and indicators urban arms i 1 Wei body Paves bunion “Flake out rust container, | Push the bunion 1a “ON” and press buttons the button Win the ane hold the "(start button on rob the main unit for 3 seconds. After abut 20 seconds, the main unit wil start up.
4.3 How indicators works dine fe i 1 Starting Blu breathing indicator 2 Started Furls indicator flash when WiFi not contact, ard blue indicator is on when WiFi connected 3 WiFi unconnected Furls indicator is on 4 Device is binding Furrier indicator flash, then turns on 5 Reset WI-Fi Purple indicator flash slowly 6 WiFi connected Blu Indicator is an 7? Charging while robot is on Breathing indicator (hive when Wi.
4.4 Download and use APP Attention: The document will update causal of APP update or other reasons, and can only be used as a guidance, unless otherwise stated. Description, Information and suggestions don't constitute any guarantee, Summary: The document mainly states partition procedures and matters need attention for new users. APP download and using environment Phone with Android and upper version system, download "Puppy Robot APP.
1} Register and login 1. Register you are a new user, input phone umber or dermal address, sat password, click “send verification code”, and intrepid the coda after you overactive 1, cock ‘register’ 2. input registered account with phone number or mail dress, input password and login. EE pe iis i a fF yeu have an account but forget password, ck Sore password” to get your password bath.
23 Add device 1. Click "add device” alter login, add robot. 2 Fusion the guidance in the APP, f the connection backs because of bed signal, please try again. Tarts an the power button (take out dust container first) « Click add device. Press start and detour button and hed for 3 seconds, Click “nest”. Take the following procedure with iPhone: Take the following procedure with Android hon 3. Conrad home WiFi input WiFi name and password, cock need. {Pleasant set & password first fF there fs no passed) 3.
Take the following procedure with iPhone: Take the following procedure with Android phone : 4. Turn te WEE setting, choose Wi Fi name starts with “puppy”, Hack ta APF, ick “connect ta Rabat’ A, Conn act nomad WF input WEF name and password, click rat’ {Please set & password first If theta is password) RE Gadded Sammie 5, Wait for the connection of phone and Davies, {there may be connection allure 1 many devices under mass WI-Fi ar too many phones connect to WEF try it several times f faked | 6.
Area cleaning +. Sat map partition before first use; 2. Switch to “map partition, click “create new armada; Area cleaning: normal cleaning 3. Set a rebel for the area to be created, end thees will be a square ares set in the map; Clink and ** to ald and deduct points, ong press snd move point to change the shape of cleaning area. The earn wil be defalcation os normal destining {marked with pink color), which means the robot wil Clean this ares only.
Area cleaning: deep cleaning Area cleaning: forbidden cleaning Press “deep cleaning” alter map sat {marked with bis color), prams “save” to finish setting. This area will be circadian twice iy “vase cleaning” Press “forbidden cleaning’ after mep set marked with rad collar, This ares wil: be forbidden sma for th robot, press “sava® to finish chatting.
43 More function Appointment cleaning Click “more” to this page, and choose countermanding function. Click "appointment cleaning” to sat craning tim, mods and fragrance, and the robot wi start cleaning automatically af appointed me. BA . DND mode Delete map Clio *DND to set DND time, during that period, the: test wart continue cleaning or transmit write message, but can steel be entrained by APP or main body bullpen to start cleaning.
My device My device shared device Click ‘my device” to the management interface, amid manages user list of the device showed on tha page. Click the small gear button on the right top of “ity device” for more control! of the device. Add devices” Arabia a user control Mary reservists, ~*Surtch device” enable a user switch control of rab, +*Share device” enable many users control the robot together.
5. Product maintenance Please make maintenance for the machine according to your usage Frequency 5.1 Clean charging contractor 1. Pleas turn off the power or pull out the plug. 2. Please clean the machine with dry cloth each month. 3. Don't clean With oils. 5.2 Clean dust container 5.2.1 install and uninstall dust container 5.2.2 Clean dust container 1. Open dust container, pour the dust 2. Chan dust container with a scanning brash.
3. Take out filter components, clean dust on the filter with cleaning brush. 4. Wash dust container and filter net, (Note: dust container can not be reinstall into main body is totally dry. 5.
5.3 Clean main brush 5.3.1 install and uninstall dust container 1. Push ‘nck bar and pull up; 2. Grab the main brush and pull up; 3. Take out rubber bar and main brush. 5.3.2 Clean main brush 1. As showed in the picture, clean matey 2. As showed in the picture above, clans rush and rubber bar regularly. hair and char partials twined on the main brush.