Use and Care Manual

Performance Data Sheet:

Note: Read this performance data and compare the capability of this system with your actual water treatment

needs. It is recommended that, before installing the system, you have your water supply tested to determine

your actual water treatment needs.

This system conforms to NSF/ANSI 42 and CSA B483.1 for the specific performance claims as verified and substantiated by test data.

While testing was performed under standard laboratory conditions, actual performance may vary.

This system has been certified by NSF International according to NSF/ANSI 42 and CSA B483.1 for the reduction of substances listed

below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal

to the permissible limit for water leaving the system as specified in NSF/ANSI 42.

PUN1FS with PUNCRB Filter

Substance

Average Influent

Challenge

Concentration

Percent Reduction

Requirement

Percent Reduction

NSF Standard 42

Chlorine 2.0 mg/L ± 10% ≥ 50% 91.8%

Particulate Class III 10,000/mL ≥ 85% 99.9%

Flow Rate =1 gpm (3.78 lpm) Capacity = 3000 gallons (11,350 L) or 6 months

Manufactured and warranted by GHP Group Inc.

USA: 6440 W. Howard St. Niles, IL 60714-3302

Canada: 271 Massey Rd. Guelph, Ontario, N1K 1B2

Tested by NSF International according to NSF/ANSI Standard 42 and CSA B483.1.

Replacement Parts List:

Item Description Part #

1 Filter Cartridge PUNCRB

2 Small O-Ring, Filter Sump VWC10012

3 Large O-Ring, Filter Sump VWC10013

4 Sump Wrench VWC10007