Operating instructions

h1 = 7
h2 = 53
h3 = 109-118
min 50/75
min 200
Ø100
78
590
590
541 150
320
590
320
320
85
45230
375
35 291
150
320
35250
160
691
175
70
Installation and technical data
Page 17
Minimum distance 50 mm,
with water connection 75 mm.
40 mm foot (h2) 691 mm + 53 mm = 744 mm
100 mm foot (h3) 691 mm + 109 - 118 mm = 800 - 809 mm
Adjustable feet (optional)
Cross-section from above (grommet hole)Top view
Side viewFront view
Prepare a stable, ergonomic surface
(min. load capacity: 150 kg). The control unit
should be at eye level.
Distance to the wall must be at least 50 mm. When used with a water
connection, we recommend a distance of 75 mm to the wall. Clearance
above the machine must be at least 200 mm.
Adjustable feet (optional) can be used to compensate for unevenness
or height differences.
If optional add-on units are installed, up to an additional 355 mm may
be required per add-on unit.
Observe the connection requirements of the add-on units.
 see page 18.
Installation dimensions of the PuraDimensions of the Pura