Operating instructions


4
4
4
44 44
44
4 4 4
!
OK
0:47
37 38 39
OK
43
i
VIIIII II
45
0:47
44
35
34
4
36
4
41
42
4
40
33
Issued: 05.11 Item number: 1N 330 019/B Your machine may differ from the one shown here, depending on the version.
Pura fresco Cleaning Instructions - Instructions
Maintenance
Neutralize
Neutralization brewing
An optional neutralization
brewing cycle is carried out.
Select product
Coffee
Coffee
small
Machine switches to Product level.
The machine is ready.
Before drink preparation, prepare
with milk pump (priming) and fill
milk lines.
 See Operating instructions,
chapter Start-up, Filling and
Emptying.
Remove, empty and replace the
drip tray.
Open the door.
Remove the intake hose and
remove the container.
Rinse out thoroughly with
water.
Information on cleaning the
water tank, brewing unit, mixing
chamber, bean hopper and
powder container can be found
in the Pura operating instruc-
tions (item number 1N330004).
Maintenance
Remove container with water
Clean
Finishing cleaning
Confirm the completed task by
pressing OK.
Clean cycle is ending.
Add milk to the container, if
necessary.
Insert the container and guide
the intake hose in.
Close the door.
Open the door.
Remove the intake hose, re-
move and empty the container.
Remove, empty and replace the
drip tray.
MaintenanceMaintenance
Empty drip tray
Remove container with water
Maintenance
Clean
Finishing cleaning
Rinse
Clean
Clean
Insert container with water
Risk of scalding!
From hot water and hot steam.
Do not touch the outlets or the
area under the outlets.
WARNING
A list with subsequent steps is
displayed.
Machine rinses.
Confirm the completed task by
pressing OK.
Rinsing starts.
Insert the container and guide
the intake hose in.
Close the door.
Fill container with 1 liter of
cold water.