Specifications

Transporting and Security
Always secure your kayak properly when storing, transporting or locking it up. When
transporting your kayak, it should be empty with the rudder or skeg in the locked position. Use
a solid, specialized roof rack system with kayak cradles. Kayak cradles distribute pressure
evenly when loaded on a kayak rack.
Cam buckle straps and bow and stern lines provide the safest, most secure transport of your
kayak. Always place straps as close as possible to the bulkheads for this is the strongest area
of a boat. Cinch the straps snugly without over-tightening. Over-tightening can put undue
stress on your boat’s hull, and can cause damage to the finish on a fiberglass/composite kayak.
It can also cause warping of the hull on a thermoform boat. Run bow and stern safety lines as a
secondary safety measure if need be.
To lock your kayak onto a roof rack, run a cable through the cockpit coaming’s side flaps
(beside the seat bottom), the U-bolt, or security bar. Fasten the cable to the roof rack. It’s a
good idea to stop and check your load occasionally as you travel.
Storage
To prevent rain and debris from entering the cockpit, always use a cockpit cover when storing or
transporting your kayak.
Protect your kayak from exposure to the sun and UV damage. A kayak stored in very cold
conditions may become fragile, so avoid impact until it warms up.
When storing the kayak, remove any neoprene hatch covers to prevent the elastic from
stretching out and to allow airflow in the compartments. Additionally, the cockpit cover should
be removed periodically and any moisture in the cockpit area sponged out (humidity can
condense & pool in the cockpit area when covered).
Kayaks should be raised off the ground during storage to help prevent moisture build-up. To
suspend a kayak we recommend using a cradle of 2” or wider nylon strapping around the
bulkhead area. Never hang a kayak from the bow or stern. Your local Seaward Kayak dealer
can advise you storage options.