Specifications

5. Once aligned, insert the 30mm Capscrews into the three radial cavities in the
Lovejoy. Tighten each capscrew just far enough to ensure proper threading until
all screws are properly aligned and threads are started.
6. When all three capscrews are in place, Tighten to 20 ft.lb. It may be necessary,
once all capscrews are in place, to turn the crank pulley on the engine to access
all of the capscrews for torqueing.
7. Inspect the Lovejoy for
proper alignment as
illustrated at right.
Loosen capscrews and
re-tighten, if necessary,
to ensure that the
Lovejoy is free from
distortion.
8. Re-check torque.
9. Replace Cat Pump platform.
10. Re-connect wiring connections at alternator as described in the alternator manual
included in the genset instructions.
Shows correct and incorrect radial coupling alignment.
Notes:
- 6 -