Operation Manual

www.pure-acoustics.com
Installing the unit
1. Locate the area where you would like to install the unit in the wall.
(Make sure you have access to 110/220V power source)
2. Prepare 110/220V cable length (necessary length varies by job site)
3. Prepare speaker audio cable length according to your needs (0.75mm is preferred)
4. Using the included electrical box trace the area where you would like to install the unit
5. Cutout the marked area using a “fine saw” (extra care should be taken in order to avoid over
cutting)
6. Push out the holes on the electrical box prior to installing it in the cutout area on the wall.
7. Connect the power cable length to the power source
(WARNING: MAKE SURE TO DISCONNECT THE POWER MAIN BEFORE CONNECTING
ANY CABLES TO THE A POWER SOURCE)
8. Connect the speaker audio cable length to the audio speakers and then to the audio terminal
ports on the back of the unit.
9. Pass the connected cables through the holes in the electrical box and then to the audio and
power terminal ports on the back of the unit.
Once again we thank you for purchasing the AV-105BT In-wall Bluetooth Multimedia Amplifier. It is
our hope that you enjoy this product every time it is put to use therefore, we suggest that you keep
this user manual safe for future reference and so it may be passed on to the next owner.
Please feel free to visit our website www.pure-acoustics.com for more information on this product as
well as hundreds more
Enjoy!