Operation Manual

pick answer, press once more to end the call.
AUX Playback: Use the supplied audio cable to connect the speaker to the music source (i.e. computer, iPod, iPhone,
iPad etc...) by inserting one end to the speaker's AUX port and the other end to the music player's audio
port. When the music player begins playing music, the speaker sounds right away. Tracks can be selected
and volume adjusted on the music player only.
Intelligent Quick Recharge: Recharge can be performed in the standby mode or power-off situation. Before recharging,
plug the mini-USB cable to the speaker's USB port and the other end to the USB port of the
computer or the USB charger. When fully recharged, the red indicator light will turn off.
VIII. Compatibility
Wireless：Devices configured with Bluetooth 2.1+EDR or higher version such as iPad, iPhone (software 3.1 or higher),
iPod Touch and MAC as well as a most Smartphone’s or computers that support Bluetooth.
Bluetooth V2.1+EDR consist of protocols like A2DP, AVRCP and HFP
IX. Toubleshooting
Faults Phenomena
Solutions
Unable to pair up with other
devices
1. Check whether the speaker is still in pairing mode or switch it off and then on
again.
2. There are too many Bluetooth devices in proximity that cause difficulty in
connection. Please turn them off.
The sound is rather low or
distorted
1. Check the Bluetooth device’s volume and then adjust it to a proper level.
2. Recharge the battery
The music stops from time to time
1. Check whether the speaker’s effective transmission range is exceeded or there is
an obstacle standing between the speaker and other Bluetooth devices.
The Bluetooth indicator remains off
1. Battery power is low and needs to be recharged.
2. Turn it on again.