Use and Care Manual

9
MODEL# 9308TS
STEP 6:
It is required that the Base be filled with
either sand or water to stabilize and keep it
grounded while in use.
Locate the opening to the side of the middle
Base Cap on the top part of the Base.
Fill with your preferred weight method.
STEP 7:
Parts:
Part 7 (x1) - Base Cap
Part 8 (x1) - Cap Ring
Make sure That the Cap Ring (8) is inside
the Base Cap (7) to prevent it from bending
or releasing from the opening.
Place Base Cap on opening to prevent
weight to escape while in use.
Sand
Water
7
8
ASSEMBLY INSTRUCTIONS