38” MINI TRAMPOLINE MODEL# 9038MT PRODUCT MANUAL - VERSION 03.16.05 FOR AGES: 13+ WEIGHT LIMIT: 220 Lbs 100 Kgs ADULT(S) NEEDED: TOOLS NEEDED: WARNING/ADVERTENCIA • Do not allow more than one person on this product at any time. • Children must be supervised by an adult at all times. • Not recommended for children under 13 years of age. • The contents of this package are not suitable for children under 3 years of age. Contains small parts which may cause choking. • ADULT ASSEMBLY REQUIRED.
CUSTOMER SERVICE INFORMATION Thank you for purchasing: 38” MINI TRAMPOLINE MODEL# 9038MT At Global Quality Brands®, we want all of our customers to be completely satisfied with their purchase. Please take time to review the contents of the product you have just received to make sure that all of the parts are included. If you find that any parts are missing or damaged, we will happily provide replacement parts at no charge within 30 days of purchase.
LIMITED WARRANTY Global Quality Brands® warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of 90 DAYS FROM THE DATE OF ORIGINAL PURCHASE. This Limited Warranty is not transferable and is available only for the original purchaser of the Product. The Company’s obligation under this warranty is limited to replacing or repairing the Product, at the discretion of the company.
WARNINGS IMPORTANT MESSAGE WARNING - PLEASE READ ADULT ASSEMBLY REQUIRED CHOKING HAZARD - Small Parts NOT for children under 3 years of age. WARNING: While every attempt is made to ensure the highest degree of protection in all equipment, we cannot guarantee freedom from injury. The user assumes all risks of injury due to use. All merchandise is sold on this condition, which no representative of the company can waive or change. 4 GQBrands.com CustomerService@GQBrands.
WARNINGS Please read these warnings and the information in this manual in its entirety. Failure to comply with the following instructions may increase the risk of serious injury and/or death: • This unit is designed only for jogging in place and similar bounding exercises. • Not recommended for children under 13 years of age. • Maximum weight limit: 220lbs. (100kgs) • Children MUST NEVER use the trampoline unless supervised by a responsible adult with knowledge of trampoline use.
ASSEMBLY WARNINGS • Make sure the trampoline is placed on a stable and leveled surface. • Make sure the trampoline area is well lit. • Make sure there are no obstructions above, beneath, or around the trampoline. In the interest of your safety, it is important that you read both the safety notice and the assembly instructions carefully before using or allowing use of this product. • Ensure the feet are firmly secured and the frame pad covers the springs before each use.
PARTS LIST Part # Description QTY Part# Description QTY 1 Frame x1 6 40mm Square Neck Bolts x12 2 Jumping Mat x1 7 Nut x12 3 Spring x30 8 Washer x6 4 W-Hook x15 9 Frame Pad x1 5 T-Section Piece x12 10 Leg with Cap x6 1 5 6 7 2 3 MODEL# 9038MT 8 9 4 10 7
ASSEMBLY INSTRUCTIONS STEP 1: Assembled Frame NOTE: The Frame Pad (Part 9) may be already attached to the Frame, remove it and place it aside until Step 3 The Frame (Part 1), Jumping Mat (Part 2), Springs (Part 3), & W-Hooks (Part 4) should be assembled in one piece. Place assembled Frame on an even, clean, & flat surface to install. Make sure that there are no obstructions in your way when building the Mini Trampoline.
ASSEMBLY INSTRUCTIONS STEP 2: Locate: x12 T-Section Pieces (Part 5), x6 40mm Square Neck Bolts (Part 6), x6 Nuts (Part 7). Locate the T-Section openings in the frame (Shown in page 8) to begin installing the T-Sections Pieces into the Frame. (5) A. Place a T-Section Piece on the outside of the frame and the other half from the inside of the Frame. (5) All openings should line up. Make sure that the T-Sections are facing up to install the legs in Step 5. B.
ASSEMBLY INSTRUCTIONS STEP 3: A A. Flip the Frame & Jump Mat in order to place the Frame Pad (Part 9). (9) Make sure to locate all six loops in the Frame Pad. Line them up to all T-Sections inserts. B. Hook all loops in the inserts openings of the T-sections before installing the legs. Once the Frame Pad is placed and snug, flip the frame again so the Jump Mat faces the ground to begin installation of the legs.
ASSEMBLY INSTRUCTIONS STEP 4: Locate the following parts: x6 Legs with Caps (Part 10), x6 40mm Square Neck Bolts (Part 6), x6 Washers (Part 8), & x6 Nuts (Part 7). 4 NOTE: If the Caps from the Leg Poles are not already placed after unboxing, make sure to insert them on the opposite side of where the openings are located as shown. This will make sure that the openings are clear when installing into the Frame. Repeat this process until you have all six assembled Legs with Caps (Part 10).
FREQUENTLY ASKED QUESTIONS • Question: “One of my trampoline legs has broken” or “The trampoline padding or mat is damaged, how do I replace it?” • Question: “I had a part missing from my box” or “something was damaged during assembly, can you send it to me?” Answer: If you are still within your warranty period (90 days from initial purchase) You should contact customer service and request more information.
