Instructions / Assembly

Your kids’ trampoline is designed to be very low maintenance.
● If any part of the trampoline frame requires cleaning, simply wipe with a damp cloth. (Do not jump
on the trampoline after cleaning until completely dry)
● If the paint is chipped, we recommend you lightly rub the damaged area and cover using a
non-toxic enamel paint.
● If the cover becomes dirty or needs washing, remove the foam insert (top foam and side skirt
foam). If possible, spot wash the cover. If necessary, you may hand wash the trampoline cover, but
please be aware that this will affect the efciency of the ame retardant applied to to it. DO NOT
Machine Wash or Tumble Dry. Always allow to air dry.
IMPORTANT: While no regular maintenance is required, you must inspect the trampoline before
each use and replace any worn, defective, or missing parts. The following conditions could repre-
sent potential hazards: Missing, improperly positioned, or insecurely attached frame padding; Punc-
tures, frays, tears, or holes worn in the bed or frame padding; Deterioration in the stitching or fabric
of the bed or frame padding; Broken or missing springs; A bent or broken frame; A sagging jump
mat; or sharp protrusions on the frame or suspension system. Cease using trampoline immediately
and secure it against unauthorized use if any of these conditions are present.
Question: “The Handrail ends do not point in the right direc-
tion, I cannot assemble the center handrail piece, are the
holes drilled wrong?”
Answer: IF THE HANDLE PIECES DO NOT SEEM TO BE ORIENTED IN THE CORRECT
DIRECTION, YOU MAY HAVE ASSEMBLED THE HANDLE PIECES ON THE WRONG
LEGS. REMOVE THE HANDLE BASES AND SWAP THE SIDES THEY ARE ATTACHED TO.
Question: “The foam padding or mat is damaged, what should I
do?”
Answer: IF YOU ARE STILL WITHIN YOUR WARRANTY PERIOD (90-DAYS FROM
INITIAL PURCHASE) YOU SHOULD CONTACT CUSTOMER SERVICE (info below).
YOU CAN ALSO PURCHASE REPLACEMENT PADDING AND MATS AT:
http://www.pureglobalbrands.com
Question: “I had a part missing from my box” or “something was
damaged in shipping, can you send it to me?”
Answer: IF IT HAS BEEN 30 DAYS OR LESS FROM THE DATE OF YOUR INITIAL
PURCHASE, YOU CAN CONTACT CUSTOMER SERVICE (info below) FOR A REPLACEMENT
PART TO BE ISSUED.
Telephone: 866-498-5269 (9am-5pm, M-F)
Fax: 561-833-1996
FREQUENTLY
ASKED
QUESTIONS
1 866 498 5269
Customer Service
customerservice@puregbi.com
CARE AND
MAINTENANCE
MODEL NO. 9020CT