Instructions / Assembly

Next fold the red top fabric of the Race Car cover in the same fashion which you attached the
black fabric base, keeping the foam ring centered on the trampoline.
INSTRUCTIONAL “HOW-TO” QUICK VIDEOS ALSO AVAILABLE ON LINE AT: pureglobalbrands.com
STEP 2
ATTACH COVER
AND PADDING
PARTS NEEDED:
Race Car Cover (1)
Inner Padding (1)
1 866 498 5269
Customer Service
[e-mail]
MODEL NOS. 9020CT
3. Begin to attach the Race Car cover to the trampoline by locating the large seam in the center of
the black fabric (see diagram on right). Line this seam up to the leg that is located directly above
the Trampoline logo. This will be where the “nose” on the head is located. It is important to keep
this seam as close to the chosen leg as possible during assembly of the trampoline cover.
For ease of assembly, it is recommended that another
adult assist during this step.
While attaching this cover, ensure that the mesh safety
skirt stays at against the springs.
Once attached, place the foam ring on top of the black
cover fabric.