Instructions / Assembly

Step 2: Complete the Steps Assembly
A. Slide each of the steps so they are positioned evenly about 5-6 inches above each groove in the
Ladder riser.
B. Gently pull apart the Step Lock Housings and insert them onto the Ladder Risers just above the
two grooves in each Riser. Next, slide them down onto each groove to secure them into place.
Remember to position the Housings correctly as noted above before installing the Steps.
C. Slide the Steps down onto the Step Lock Housings, making sure that the tab on the inside of the
Step hole is aligned with the channel in the Step Lock Housing.
D. Once the Step is fully inserted, turn the Step Lock Housing in the direction of the “Closed” position
to lock it into place.