40-inch Rainbow Flying Saucer Swing MODEL# 9304FS PRODUCT MANUAL - VERSION 7.20.01 FOR AGES: 3+ WEIGHT LIMIT: 300 136 Kg Lbs TO BUILD: X 1 Manual en español ubicado en GQBrands.com Spanish Manual located at GQBrands.com CUSTOMER SERVICE GQBrands.com • CustomerService@GQBrands.
CUSTOMER SERVICE INFORMATION Thank you for purchasing: 40-inch Rainbow Flying Saucer Swing MODEL# 9304FS To register you product please visit: www.globalqualitybrands.com/product-registration or scan code: If you have an issue with your item, do not return. Please report items that are damaged or missing parts to the manufacturer GQ Brands within 3 days of delivery. Contact customer service at customerservice@gqbrands.com to open a ticket.
WARNINGS ADULT ASSEMBLY REQUIRED CHOKING HAZARD - Small Parts NOT for children under 3 years of age. Please read these warnings and the information in this manual in its entirety. Failure to comply with the following instructions may increase the risk of serious injury and/or death: • This unit must be assembled and disassembled by ADULTS ONLY. • Always be sure that the swing is clear of any persons, pets or obstructions before swinging.
PARTS LIST 1) Swing Mat 2) Curved Frame Pole with Foam x1 x4 3) Rope with Rings x2 4 - Wrench Tool 5 - Eyelet Bolt x1 4 7 - Washer 6 - Nut x4 GQBrands.com x4 CustomerService@GQBrands.
ASSEMBLY INSTRUCTIONS STEP 1 Place the Swing Mat (Part 1) on the floor, and open the 4 velcro closures as shown. STEP 2 Note: Make sure the male and female ends of the curved enclosure poles (Part 2) face the same way when inserted so you can connect the frame poles when needed. Insert the Curved Frame Pole with Foam (Part 2) into the sleeve opening as shown. Repeat this with all 4 poles. Insert until you can see both ends like diagram shown. 5 GQBrands.com CustomerService@GQBrands.
ASSEMBLY INSTRUCTIONS STEP 3 Attach the male end of the curved frame pole into the female end and connect until hole is fully visible. Repeat on each side so it folds in half like diagram shown.
ASSEMBLY INSTRUCTIONS STEP 4 Connect remaining frame poles to form a full circle. STEP 5 Insert the Rope with Rings (Part 3) through the slit in velcro as shown. 7 GQBrands.com CustomerService@GQBrands.
ASSEMBLY INSTRUCTIONS STEP 6 Unscrew the nut(Part 6) and washer (Part 7) from the eyelet bolt. (Part 5) STEP 7 Insert the eyelet bolt go through the frame pole hole.
ASSEMBLY INSTRUCTIONS STEP 8 Attach the washer and nut to the eyelet bolt. STEP 9 Using the Wrench Tool (Part 4) tighten the nut onto the eyelet bolt.
ASSEMBLY INSTRUCTIONS STEP 10 Once tightened. Close the velcro cover and Continue this step on the next hole in a clockwise manner. STEP 11 2 3 Both ropes will look like diagram. When Complete with first rope move to next hole in clockwise direction. Attach second rope by repeating steps 5 through 10. 1 MODEL#9304FS 4 Rings at top of ropes can be hung on any swing hardware attachment.
FREQUENTLY ASKED QUESTIONS Question: “A part is damaged, how do I replace it?” Answer: If you are still within your warranty period (90 days from initial purchase) You should contact customer service. You can also purchase select replacement parts at: www.purefun.
