KIDS SWIVEL SEE SAW MODEL# 9307SS PRODUCT MANUAL - VERSION 03.16.04 FOR AGES: 4-10 WEIGHT LIMIT: 150 Lbs 68 Kgs ADULT(S) NEEDED: TOOLS NEEDED: WARNING/ADVERTENCIA • Please read all the instructions before using this product. • Consult a physician before beginning any exercise program or strenuous activity. • Do not allow more than one person on this product at any time. CUSTOMER SERVICE • Adult supervision is required. GQBrands.com • ADULT ASSEMBLY REQUIRED.
CUSTOMER SERVICE INFORMATION Thank you for purchasing: KIDS SWIVEL SEE SAW MODEL# 9307SS At Global Quality Brands®, we want all of our customers to be completely satisfied with their purchase. Please take time to review the contents of the product you have just received to make sure that all of the parts are included. If you find that any parts are missing or damaged, we will happily provide replacement parts at no charge within 30 days of purchase.
LIMITED WARRANTY Global Quality Brands® warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of 90 DAYS FROM THE DATE OF ORIGINAL PURCHASE. This Limited Warranty is not transferable and is available only for the original purchaser of the Product. The Company’s obligation under this warranty is limited to replacing or repairing the Product, at the discretion of the company.
WARNINGS IMPORTANT MESSAGE WARNING - PLEASE READ ADULT ASSEMBLY REQUIRED CHOKING HAZARD - Small Parts NOT for children under 3 years of age. WARNING: While every attempt is made to ensure the highest degree of protection in all equipment, we cannot guarantee freedom from injury. The user assumes all risks of injury due to use. All merchandise is sold on this condition, which no representative of the company can waive or change. 4 GQBrands.com CustomerService@GQBrands.
WARNINGS Please read these warnings and the information in this manual in its entirety. Failure to comply with the following instructions may increase the risk of serious injury and/or death: • This unit must be assembled and disassembled by ADULTS ONLY. • DO NOT allow more than one child on each Swivel See Saw seat at a time. • This Swivel See Saw is suitable for use by most children 4 to 10 YEARS OF AGE.
ASSEMBLY WARNINGS • When you are ready to start, make sure that you have the correct tools at hand, and adequate space for assembly. Please refer to the table for part descriptions and numbers. The assembly instruction uses these descriptions and numbers as reference. Make sure you have all parts listed. • Enclosed are the current specifications and product features available at time of printing, however, changes may be made in equipment, availability, specifications and features without notice.
PARTS LIST Part # Description QTY Part# Description QTY A M6 110mm Bolt x4 M Handle Bars with Foam x2 B M6 60mm Bolt x4 N Seat x2 C M8 70mm bolt x1 O Leg x2 D M6 45mm Bolt x4 P M6 Nut x22 D1 M6 50mm Bolt x2 Q Spanner x1 E M6 25mm Bolt x8 R Spanner x1 F M6 Washer x44 S M8 Washer x2 G M6 Washer x22 T M8 Washer x1 H Main Center Bar x1 U M8 Nut x1 I Upper Support Tube x1 V Plastic Tube between K & H x2 J Lower Support Tube x1 W Small Plastic
ASSEMBLY INSTRUCTIONS STEP 1: A. Secure a plastic seat (N) onto each end of the Side Bars (K) using 4x M6 25mm Bolts (E), 8x M6 Washers (F), 4x Lock Washers (G), and 4x Nuts (P), as shown in Figure 1. NOTE: Make sure that the Lock Washer is resting against each Nut. B. Affix the a Handlebar (M) to each of the Side Bars (K) using 2x M6 45mm Bolts, 4x M6 Washers (F), 2x Lock Washers (G), and 2x Nuts (P) as shown in Figure 2. Make sure that the Lock Washer is resting against each Nut. 8 GQBrands.
ASSEMBLY INSTRUCTIONS STEP 2: A. If not already present, see saw a Small Plastic Tube (V) onto the end of each Side Bar (K) you assembled. Next, see saw the bars into the Main Center Bar (H) as shown in Figure 3. B. Formation 1 (Extended, below left): Secure with 2x M6 60mm Bolts (B) 4x M6 Washers (F), 2x Lock washers (G) 1x M6 50mm Bolt (D1), 2x M6 Washers (F), and 1x Lock Washer (G) using the left diagram in Figure 4.
ASSEMBLY INSTRUCTIONS STEP 3: WARNING: To avoid your fingers becoming caught during assembly, you must attach the bolts only as noted below. A. Attach 2x Seesaw Legs (L) to the Upper Support Tube: Using 2x M6 110mm Bolts, 4x M6 Washers, 4x M6 Lock Washers, and 2x Nuts attach 2 Legs (L) to the Upper Support Tube (I) as shown in the diagram. NOTE: The (L) Legs must go into the upper pair of pre-drilled Bolt Holes in the Support Tube. B.
ASSEMBLY INSTRUCTIONS • NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface can result in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and environmental factors can reduce their shock absorbing effectiveness. Carpeting and thin mats are generally not adequate protective surfacing.
CARE & MAINTENANCE • IMPORTANT: While no regular maintenance is required, you must inspect the see saw before each use and replace any worn, defective, or missing parts. The following conditions could represent potential hazards: Missing, improperly secured or damaged bolts, A bent or broken frame, and/or damaged seats. Cease using see saw immediately and secure it against unauthorized use if any of these conditions are present.